User manual ONKYO TX-SV515PRO

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safeguards 1. Read Instructions--All the safety and operating instructions should be read before the appliance is operated. Retain Instructions--The safety and operating instructions should be retained for future reference. [. . . ] (6 m), you should set the Center and Subwoofer distances between 15 and 25 ft. · The SurrRight, Surr Left, and Surr Back distances should be up to 5 ft. (6 m), you should set the SurrRight, Surr Left, and Surr Back distances between 5 and 25 ft. (1. 5 and 7. 5 m). 26 Configuring Speaker Set A--Continued 3 CABLE/SAT CD/DVD When you've adjusted each speaker, press the remote controller's [TEST] button. The test tone stops and the previous display reappears. Note: If no adjustments are made for two minutes, this function is cancelled automatically and the previous display reappears. CH + CH SEL TEST LEVEL / VOLUME / Adjusting Individual Speaker Volume With this function you can adjust the volume of each individual speaker so that you can hear all speakers equally at the listening position. Note: You cannot use this function while the TX-SR501/ TX-SV515PRO is muted (see page 33). 1 Press the remote controller's [TEST] button, and turn up the volume so that you can hear the test tone sufficiently. While each speaker outputs the test tone (pink noise), its name appears on the display, as shown. 2 Use the remote controller's [CH SEL] button to select each speaker, and use the LEVEL [ ] [ ] buttons to adjust the volume. Speakers are selected in the following order: Left Center Right Surr Right Surr Back Surr Left Subwoofer. Notes: · Only speakers that are included in the current configuration output the test tone. · The subwoofer will not output the test tone if it's off. · If you don't press any buttons for two seconds, the next speaker is selected automatically. 27 Playing Your AV Components This chapter explains how you can play your AV components through the TX-SR501/TX-SV515PRO. · If the beginnings of tracks from a PCM source are cut off in Auto mode, try fixing the format at PCM. · If noise is produced when fast forwarding or reversing a DTS format CD or LD in Auto mode, try fixing the format at DTS. 1) To fix the signal format, use the [AUDIO SELECTOR] button, or the remote controller's [AUDIO SEL] button to select Auto. 2) While "Auto" is being displayed, use the PRESET/ ADJUST [ ] [ ] buttons to select: PCM, DTS, or Auto. When the digital signal format is fixed at DTS or PCM, only signals in the corresponding format will be output. Digital signals in other formats will be ignored, and the DTS or PCM indicator, depending on which format you have set, will flash. 1 Remote controller Press the remote controller's [DVD] input selector button, then [AUDIO SEL] button to select "Multich. " Start playback on the AV component. 2 To adjust the volume of an individual speaker, use the remote controller's [CH SEL] button to select it, and then use the LEVEL [ ] [ ] buttons. You can adjust the volume level of each individual speaker as you like. For the front-left, front-right, center, surround-left, and surround-right speakers, you can adjust the volume from ­12 dB to +12 dB. Note that these settings work independently of the individual speaker volume settings on page 27. Enabling the Tone Controls To use the Bass and Treble functions with the multi-channel inputs, first you need to enable them. You can now use the [AUDIO ADJUST] button to select the Bass and Treble functions and adjust as explained on page 37. To switch off the Bass and Treble functions, press the [DIRECT] button. [. . . ] ponent and TX-SR501/TX-SV515PRO, even if they are connected digitally (page 19). 46 Troubleshooting--Continued Symptom Possible cause Remedy Use the [FM MODE] button to select mono mode (page 31). Reception is noisy, intermittent, and the FM STEREO indicator flashes?Or, your FM antenna is in the wrong position or pointing in the wrong direction. Installing an outdoor antenna is a specialist job, so contact your nearest dealer for advice (page 23). [. . . ]