User manual ONKYO USR-5

[. . . ] Contents Quick Start Intelligent Remote Controller 4 USR-5RF Instruction Manual Before Using 7 Operations 11 Thank you for purchasing the Onkyo Intelligent Remote Controller. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new Intelligent Remote Controller. Please retain this manual for future reference. Other Information 39 Precautions Care From time to time you should wipe the front and rear panels and the cabinet with a soft cloth. [. . . ] This includes all Onkyo devices and several devices made by other manufacturers. What makes the remote controller so powerful is the ability to extend its functionality in multiple ways like programming additional functions, adding supplementary devices, recording macros and customizing the interface as it suits you best. Working with Modes When you operate your devices, the remote controller is in Use mode. For actions other than operating (like programming buttons, recording macro's, adding devices, and so on) you have to switch to the appropriate mode: : To operate devices. : To configure the remote controller to operate devices with RF or IR signals. 21 Getting the Maximum out of it To switch to another mode 1. Note: When a label is displayed, you can also display the Mode menu by tapping the label. To hide the Mode menu To prevent accidental changes to the remote controller interface and commands, you can hide the Mode menu: 1. The Mode button is no longer visible. 22 Getting the Maximum out of it 2. Programming Buttons You program the remote controller commands by transmitting infrared signals from your existing remote controls to the remote controller's learning eye. To do this, place the remote controller and the device's remote controller on a flat surface, 15 to 20 cm (6 to 8 inches) apart. Programming control panel buttons 1. Additional empty buttons appear: they can be programmed and labeled as existing buttons. Point the device's original remote controller to the remote controller's learning eye as shown (see above). Press and hold the corresponding button on your device's original remote controller. If the remote controller has learned the command successfully, OK blinks on the remote controller icon. If the remote controller has not learned the command successfully, you hear a short buzz and FAIL appears on the remote controller icon. Program all other buttons you want and relabel them as necessary (see page 25). Return to Use mode by using the Mode button. The following buttons can be programmed: control panel buttons, Device menu items, directaccess buttons and Left/Right buttons. The remote controller also offers empty control panel buttons you can program and label as existing buttons. They are only visible in Learn and Label mode and appear without label or with label (intended for a specific function). You will also see previously deleted buttons: you can restore them by reprogramming them or you can reuse them for other commands. 23 Getting the Maximum out of it Programming device items Note: When you program a command to a device item, this command is automatically assigned to the corresponding button in the Home menu. Point the device's original remote controller to the remote controller's learning eye as described above. Touch and hold either the remote controller's Left or Right button and tap the device you want to program. Even when you want to program the currently active device, you have to tap it in the Device menu. [. . . ] The TV goes blank or the input source changes · The Device menu item might be programmed to switch the input source. The Remote controller will not edit, label or delete commands · If the label locked appears on the Remote controller icon, the device control panels have been locked to prevent unwanted changes. Avoid programming the Remote controller under bright fluorescent light: it might affect the infrared signals. Borderless buttons cannot be programmed. 39 Troubleshooting The Remote controller will not switch modes · When the batteries are low the Remote controller prevents you from switching to customizing modes so that no customization can get lost. [. . . ]