User manual OREGON ATC3K

[. . . ] Quick Start ·····················································································································1 II . Camera Precautions ···································································································1 · Waterproof Feature ······································································································2 III . Technical Specifications ···························································································5 IV . Computer System Requirements ··········································································6 V . [. . . ] When in privacy mode option, pressing `Menu' will change between ON and OFF. You must confirm one of the choices to move onto the next menu mode. Item VGA QVGA Picture size 640 X 480 pixel 320 X 240 pixel fps 30 30 17 18 Sound Recording Once you have entered this mode the icon will keep flashing and "LO" will be shown on screen. Press Menu (one beeping sound) to switch to "OFF", which means no sound will be recorded. After "OFF", it will loop back to "HI" when 'Menu' is pressed again. Press the 'Confirm' button (one beeping sound) to confirm the setting and to go to the next function icon. Deleting video footage To delete the last video footage that was recorded, press the Menu button until the LCD screen shows . Note: After file deletion, the LCD screen will adjust the remaining number of files accordingly. Delete All Video Footage To delete all video footage stored in your camera, press the Menu button until the LCD screen shows . Note: It may take a few minutes to delete multiple files at one time. Setting Date/Time (Clock Set) Shift to the Date icon in the Menu mode by pressing the Menu button repeatedly. When the Date icon is flashing, press the 'Confirm' button change the date and time. to Setting the Year 1. Press the 'Menu button' to adjust the last digit of the year (2000-2009). Press the 'Menu button' to adjust the 3rd digit of the year (200X-209X). Pressing 'Confirm' will then move the cursor to allow you to adjust the 3rd digit of the year. Press the 'Menu' button to select the number and the 'Confirm' button to verify, after which you will be able to adjust the month. Setting the Month When adjusting the month, the "M" will be shown. Press the 'Confirm' button to verify, after which you would be able to adjust the day and proceed to setting the day. 20 12 19 12 Setting the Day When adjusting the day, the "D" will be shown. Press the 'Confirm' button to verify, after which you would be able to adjust the and proceed to setting the time. Setting the Time When adjusting the hour, the "H" will be shown. Press the 'Confirm' button to verify the hour, after which you would be able to adjust the and proceed to setting the minute. Press the 'Confirm' button to verify the time and exit this mode. SD Memory Card In this unit, you can use SD Memory Cards of up to 4GB. [. . . ] -The remaining time depends not only on the time recorded, but on the color density of the video footage. Under conditions with high contrast, such as outdoors, the actual time available will be less than under low-contrast conditions, such as indoors. I can't play the video footage on my television -Ensure each end of the AV cable is properly and firmly connected to ATC3K and to your television. Some captured video footage cannot be found when SD card is inserted -The video footage may be stored on the internal memory. [. . . ]