User manual OREGON ATC9K

[. . . ] Dear Customer, Thank you for purchasing the ATC9K by Oregon Scientific. At Oregon Scientific, we understand that adventure sports enthusiasts as well as everyday enthusiasts take great pride and satisfaction in recording and viewing first person footage captured by our hands free action cam. For this reason, the ATC9K was designed and engineered with extreme precision, in order to allow you to take the adventure home with you. Review the following pages for technical information, tips and troubleshooting which will allow you to maximize your experience with the ATC9K. PLAY HARD, RECORD EVERYTHING! OREGON SCIENTIFIC and associated trademarks and trade dress are owned by OREGON SCIENTIFIC, Inc. [. . . ] Timer You can set a countdown time before the shutter captures automatically. Cont' Shots (Continuous Shots) You can set the camera to either take 3 or 5 continuous shouts with this setting. G-Sensor Settings 1. Data Display You can display G-Sensor related data on the videos and photos via HDMI output by turning on this setting. GPS Settings GPS Module is sold separately. Please refer to the corresponding manual for these settings. General Settings 1. (Laser Pointer) This setting allows you to have either 5 or 10 seconds to adjust the direction of the camera using the laser pointer before the capturing of videos after you press the "Movie Shutter" button . Privacy With Privacy mode on, all LED and Audio indicators will be turned off. Time Stamp Date and time will be stamped on the videos and photos with this setting being turned on. Auto Off Sometimes you may want the camera to turn off automatically during idle. (Light Frequency) In order to avoid flickering in the video while shooting indoors, you need to adjust this setting to match the frequency of light source with that of the shutter. Format You can format the microSD card inserted in the camera with this setting. Visit Oregon Scientific website atc. oregonscientific. com/ to download the latest firmware. Unzip the package and copy the unzipped file to the root folder of the microSD card. Insert the rechargeable battery into the battery slot as indicated until it clicks in place. If you want to release the rechargeable battery, turn the battery hinge downwards until it comes out from the slot. NOTE: When the battery is low, the battery low icon and the red LED will light up. will appear on the LCD screen Recharge the Battery by External Charger (sold separately) 1. Plug the charger to the power supply and slot the battery into the charger as indicated on the charger. The LED on the charger will light up as the battery starts to recharge. The LED will be turned off when the battery is fully charged. Recharge the Battery via USB 1. Turn the camera off, then plug the camera with the rechargeable battery to a computer with the USB cable provided. NOTE: The rechargeable battery will be fully charged in 2-3 hours. - 12 - UK XI) Power Supply XII) MicroSD Card Insertion / Removal Insert 1. Ensure the microSD card terminals are facing down, then insert it carefully and completely until it clicks in place. [. . . ] Select "View Videos" or "View Photos" by press the "Right" button . Press "Menu" button to activate the submenu when you are in the photo thumbnail view. To exit the slideshow, press "Menu" button . - 21 - There's no display · Does the rechargeable battery properly installed?· Does the rechargeable battery need replacing? After the ATC9K is connected to my PC, it cannot find the new drive in the `My Computer' folder · Ensure each end of the ATC9K USB cable is properly and firmly connected. [. . . ]