User manual OREGON PE903

[. . . ] While you go about your daily tasks, the Marathon Walker (PE903) is always by your side monitoring your progress and giving you (sometimes witty) feedback. Visualiser le temps et la distance restante pour achever la distance cible paramétrée Target: Steps you wish to accomplish Distance you wish to accomplish Time already completed Distance already completed Time you have to reach target Distance remaining to reach target System will soon reset, keep on walking! NOtE To conserve energy, the built-in sleep mode will activate when unit detects no movement. [. . . ] When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste. Due to printing limitations, the displays shown in this manual may differ from the actual display. The contents of this manual may not be reproduced without the permission of the manufacturer. NOtE The technical specifications for this product and the contents of the user manual are subject to change without notice. nOtE Features and accessories will not be available in all countries. : Indicates step counter is on / Indicates steps walked is displayed 8. Data from previous day ( ) Steps recorded Distance recorded Today's record ( ) Accumulated steps walked Accumulated distance walked Accumulated time Accumulated calories burned Pull plastic strip to remove from unit. To effectively use the pedometer for calculating calorie burned (based on step count and user body weight) and distance walked (based on step count and length of user's stride), you are advised to set the time and your user data in the Setting Mode. The unit will automatically set a 10 km target the first time it is switched on or after each battery change. CARRyING tHE PEDOMEtER The PE903 can be carried around the neck or in pockets and handbags by using the adjustable strap provided. Default screen (Daily Mode) Current step count Distance walked tIP Press MODE to jump to Daily Mode default screen. To reset records: The pedometer is designed to automatically reset when the current step counter reaches 999, 999. Alternatively, setting a new target distance will also reset the current step counter and return it to 0. sEttING MODE In the Setting Mode , you can set : · Target distance / finish time · clock / calendar · User's weight and measurement unit (kg / lb); stride length and measurement unit (cm / in) NOtE Once measurement unit has been set in Stride (User profile sub setting), all other units will automatically follow the same format (imperial / metric). Press DISP to toggle between sub modes (Target / Time & distance / User profile). 5 / 26 mi) Increments of 1 hour (up to 5 hours) You can only change this when setting target. [. . . ] This unique feedback feature motivates you to try harder and reminds you of your set target. Once target has been set, the following graphics may be displayed: Every 24 hours Current step count Distance walked No movement detected after 1 hour Fail to complete target distance within target timeframe C'mon, try that challenge again Press SEt Press SEt to Set target Or Press DISP to jump to Daily Mode Successfully complete target distance ) C'mon, try that challenge again (Kom op, probeer die uitdaging nog eens) Congratulations!Of Druk op DISP om naar de Dagelijkse Modus te gaan Andere animaties (die niets met het doel te maken hebben): Voordat het apparaat de slaapmodus activeert (om stroom te sparen) 950, 000 steps achieved (stappen gelopen) Voorafgaand aan een reset (als geen doel is ingesteld) System will soon reset, keep on walking! [. . . ]