User manual OREGON RM303P

[. . . ] When using DC power adapter, the projector will be turned on all the time. If the alarm is turned, the alarm icon " " will also be projected. The unit will automatically search for the time signal at 2:00 (3:00 or 4:00 is also available if the signal is not received at 2:00), 8:00, 14:00 and 20:00 each day. [. . . ] · Do not cover the ventilation holes with any items such as newspapers, curtains etc. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. · Images shown in this manual may differ from the actual display. · When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste. · Placement of this product on certain types of wood may TM 7. NOTE: 1. During the setting period, press and hold " " or " " key to speed up the change of settings. Through "+ / - 23 hours time difference" setting, the precise time of another area will be shown. ALARM TIME SETTING 1. In normal time mode, press "SET ALARM" key once to enter the alarm time setting mode. PROJECTION ON / OFF slide switch: · Slide it to turn on / off the projector. 180° FLIP key: · Press it to rotate the projected image by 180°. RCC key: · In normal time mode, press it once to receive the RC signal for reception testing. UK / EU slide switch: · Slide it to select the country version between EU (Germany) and UK (England). The alarm will be automatically turned on when you set the alarm time. During the alarm time setting period, press and hold " " or " " key to speed up the change of settings. will not be responsible. · Consult the furniture manufacturer's care instructions for information. · The contents of this manual may not be reproduced without the permission of the manufacturer. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]