User manual OREGON RMR802A

[. . . ] 4 Manually Set Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Ice Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · · 4 EU: DCF-77 signal: within 1500 km (932 miles) of Frankfurt, Germany. UK: MSF-60 signal: within 1500 km (932 miles) of Anthorn, England. SENSOR DATA TRANSMISSION To search for a sensor: Press and hold + MODE. RMR802A: · WWVB-60 signal: within 3200km (2000 miles) of Fort Collins Colorado. to enable or to disable signal RMR802: Time zone offset sets the clock +/- 23 hours from the received clock signal time. RMR802A: Select the time zone: (P) Pacific, (E) Eastern, (C) Central or (M) Mountain. NOTE The language options are English (E), German (D), French (F), Italian (I), Spanish (S) and Russian (R). To select display mode: Press MODE to choose between clock with seconds, clock with weekday or calendar. To enable / disable signal reception: Press and hold reception. NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal. If signal reception is unsuccessful, place your unit next to force another signal to a window, press and hold search. Clock signal reception indicator: STRONG SIGNAL WEAK / NO SIGNAL TEMPERATURE To toggle temperature unit: Press °C / °F. To toggle between each outdoor sensor's readings: Press repeatedly. MANUALLY SET CLOCK To set the clock manually, disable the signal reception first. The settings order is: time zone, 12/24 hr format, hour, minute, year, calendar mode (day ­ month / month ­ day), month, day and language. OR Press and hold + MEM for 2 seconds to initiate auto toggle of outdoor channels. To toggle between current, minimum and maximum records: Press MEM repeatedly. To clear the records: 5 Press and hold MEM. EN EN ICE WARNING If the sensor falls between 3°C to -2 °C (37°F to 28°F), the green LED indicator will flash, and will stop flashing once the temperature is out of this range. NOTE As ice alert is only applicable to channel 1, to prevent flashing of LED, select channel 2 or 3 on outdoor sensor. · When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste. Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. Consult the furniture manufacturer's care instructions for information. The contents of this manual may not be reproduced without the permission of the manufacturer. Collection of such waste separately for special treatment is necessary. Remove the strip from the battery compartment before first use. · · · RESET Press RESET to return to the default settings. PRECAUTIONS · · · · · · · Do not subject the unit to excessive force, shock, dust, temperature or humidity. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. [. . . ]