User manual OREGON THT328

[. . . ] The unit will automatically reset daily at 12 am and 12 pm to record the maximum and minimum temperature respectively. If you're in the US and would like to contact our Customer Care department directly, please visit: www2. If the temperature falls between 3°C to -2 °C (37°F to 28°F), will occur and the current outdoor temperature reading will flash continuously. [. . . ] Close the battery compartment: push down the cover, slide it back and tighten the screw. Remove the plastic from the adhesive sticker, and press the unit against the glass. Do not subject the unit to excessive force, shock, dust, temperature or humidity. Do not cover the ventilation holes with any items such as newspapers, curtains etc. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. When disposing of this product, ensure it is collected separately for special treatment. Placement of this product on certain types of wood may result in damage to its finish for which Oregon Scientific will not be responsible. consult the furniture manufacturer's care instructions for information. The contents of this manual may not be reproduced without the permission of the manufacturer. Collection of such waste separately for special treatment is necessary. Reading, make sure to mount it in a location that is shielded from direct sunlight. Be sure to completely clean the glass surface of dust and dirt and let the area dry completely before mounting the unit. Failure to do so may result in bad adhesion between the window and the unit. If the adhesive sticker is damaged, it is strongly advised to use a new one. [. . . ] Whenever batteries are installed or RESET is pressed, the Setting Mode for clock will blink. The technical specifications for this product and the contents of the user manual are subject to change without notice. 22 tum) 48 g utan batteri -10°C till 50°C (14°F till 122°F) 0. [. . . ]