User manual ORION TELESCOPES & BINOCULARS GUIDE SCOPE MTG PLAT
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ORION TELESCOPES & BINOCULARS GUIDE SCOPE MTG PLAT. We hope that this ORION TELESCOPES & BINOCULARS GUIDE SCOPE MTG PLAT user guide will be useful to you.
Manual abstract: user guide ORION TELESCOPES & BINOCULARS GUIDE SCOPE MTG PLAT
Detailed instructions for use are in the User's Guide.
[. . . ] Orion Guide Scope Mounting Plate #7382
These assembly instructions assume you are using optional guide scope tube rings that come with their own mounting screws, such as the Orion 80mm guide scope tube rings. You will need a 10mm wrench or small adjustable crescent wrench to attach the guide scope mounting plate. [. . . ] Attach the guide scope mounting plate to the tube rings on your telescope. You will need to remove the piggyback camera adapter from the top of the telescope tube ring, if one is installed. There are two sets of recessed holes; these holes will match up with the spacing of the telescope tube rings on the Orion SkyView Pro and Atlas mounts. If you have another mount, you may need to drill new holes in the plate to accommodate the spacing of the tube
Recessed holes
Short tube holes Long tube holes
Figure 1.
rings. Push the screws through the plate from the top and thread them into the holes on top of the telescope tube rings. You may also need to use different screws if you are using non-Orion tube rings. The guide scope mounting plate, with guide scope tube rings attached, is now ready to be used with a guide scope for astrophotography. Unthread all alignment thumbscrews on the guide scope tube rings until they are flush with the inside of the inside of the rings before inserting the guide scope. Tighten the six guide scope alignment thumbscrews equally until the guide scope is secure.
One-Year Limited Warranty
This Orion Guide Scope Mounting Plate is warranted against defects in materials or workmanship for a period of one year from the date of purchase. This warranty is for the benefit of the original retail purchaser only. [. . . ] For further warranty service information, contact: Customer Service Department, Orion Telescopes & Binoculars, P. Box 1815, Santa Cruz, CA 95061; (800) 676-1343.
Customer Support (800) 676-1343 Email: support@telescope. com
Providing Exceptional Consumer Optical Products Since 1975
Corporate Offices (831) 763-7000 P. O. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ORION TELESCOPES & BINOCULARS GUIDE SCOPE MTG PLAT
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ORION TELESCOPES & BINOCULARS GUIDE SCOPE MTG PLAT will begin.
