User manual ORION TELESCOPES & BINOCULARS INTELLISCOPE HOLSTER

[. . . ] SkyQuest IntelliScope Controller Holster #7882 The Controller holster gives a convenient place to put the IntelliScope controller when its is not in use. [. . . ] Parts List Your IntelliScope holster kit comes with the following: 1 Metal holster 2 Attachment screws 1 Instruction sheet with template Installing the Holster Figure 1 is a template that represents the outline of the top of the IntelliScope Dobsonian base. Make certain the curve of the template lines up with the curve of the top of the base. Also make certain that you are drilling holes on the side of the base that has the IntelliScope Computer Port. Using the drill, carefully drill pilot holes through the cross marks in the template and into the Dobsonian base. Remove the template from the base. Thread the two screws into the pilot holes. Take the holster and slide it onto the screws by the two slots on its bottom. If you need to remove the holster, thread the screws back a turn or two and slide the holster off of the screws. Using the Holster Once the holster is installed, simply place the hand control into the holster, making certain that the cord does not get caught between the controller and the holster. [. . . ] Cut on dotted lines. Customer Support (800) 676-1343 Email: support@telescope. com Providing Exceptional Consumer Optical Products Since 1975 Corporate Offices (831) 763-7000 P. O. [. . . ]