User manual PALSONIC DVDR212

[. . . ] DVD R 212 DVD RECORDER PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 Safety Instructions Danger Symbol The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage in the unit. Warning Symbol The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. WARNING To prevent fire or electric shock, do not expose the unit to rain or moisture. Never attempt to open the cabinet, dangerous high voltages are presented in the unit. Maintenance Notice Do not put the unit: near strong magnetic field, somewhere exposed to direct sun or near heat radiation equipment (such as a heater), at top of other heat radiation objects, in a place with bad ventilation and much dirt, somewhere subject to vibration and instability, somewhere exposed to moisture or rain. [. . . ] Delete a mark: Delete a playing chapter and joint it with the previous chapter. In the Chapter Editing control bar menu, use the or Chapter" item, and then press the "SELECT" button. button to move the cursor and select the "Hide If the value is Hide Chapter, the current chapter will be hidden during playing. If the value is Unhide Chapter, the current chapter will not be hidden during playing. Index Picture 1. In the Program Mode control bar menu, use the or button to move the cursor and select the "Index Picture" item. If you find a favourite picture during playing, press the "SELECT" button and the picture will become the index picture of the title. Play Play, Pause, FFx2, FFx4, FFx16, FBx32, FBx4, FBx16, FB32, Slow. 1/2, Slow 1/4, Slow 1/8, Step. Press the "EDIT" button to exit this mode. When exiting, the system will write information to the disc. So the system might not respond for some time. 22 Disc Operation Introduction The Disc Operation means something done to recordable discs in the drive, including browsing disc information, finalising a disc, removing disc content, deleting the last title, compatibility and write protection, etc. Enter the Disc Operation Mode When the system detects DVD+R or DVD+RW disc in the drive, press the "DISC OPER" button to enter the mode. Menu Description The control bar menu under this mode is as shown in the chart. Erase Disc: Once this operation is done, all content in the disc will be removed completely. Overwrite Disc: An operation on a recorded DVD+RW disc to overwrite its previous content. Finalise disc: This function enables the DVD+RW disc to be played in other DVD players. (Such operation applies only to DVD+R discs) 1 2 3 4 5 6 7 Play Rename Disc Erase Disc Record a New Title Overwrite Disc Finalize Disc Lock Disc Operation Steps Play Erase Disc This operation is effective for DVD+RW discs. In the Disc Operation control bar menu, use the or button to select the "Erase Disc" option, press the "SELECT" button and a warning message pops up, "This operation will erase all data on the disc. Press the button to select "Yes", and then press the "SELECT" button to confirm. Rename Disc Erase Disc Record a New Title Overwrite Disc Finalize Disc Lock Disc The Erase Disc operation may take some time. During the operation, do not conduct any other operation, including standby; once the operation starts, it cannot be cancelled midway. Never switch off the power during the operation; otherwise the disc may be damaged. Lock Disc This operation will . cancel the write protection of a locked disc. In the Disc Operation control bar menu, use the or button to select the "Lock Disc" item, and then press the "SELECT" button. To judge if a disc is write-protected, try the "Browse Disc Information" operation. A write-protected disc cannot be recorded, erased or edited unless the write protection is cancelled. Play Rename Disc Erase Disc Record a New Title Overwrite Disc Finalize Disc Lock Disc 23 Disc Operation Rename Disc Play In the Disc Operation control bar menu, use the or button to select the "Rename Disc" item, and press the "SELECT" button to pop up a dialog box; in the given keyboard layout, use arrow buttons and the "SELECT" button to enter desired letters. Space: add a blank position, Caps: capital change, BkSk: delete a character forward, Delete: delete a character backward, Clear: delete all character, Exit: exit operation, OK: confirm operation. DISC NAME MY DVD ABCDEFGH I JK0 12 LMNOPQRSTUV 3 4 5 WXY Z ( ) _ : ?6 7 8 9 Space Caps BkSp Delete Clear Exit OK Rename Disc Erase Disc Record a New Title Overwrite Disc Finalize Disc Lock Disc Record a New Title In the Disc Operation control bar menu, use the or button to select the "Record a New Title" item, press the "SELECT" button, and then the system will change to TV status. [. . . ] P006 Ch033 Unskip P007 Press the or button to move this channel to a desired Ch034 Unskip P008 Ch061 Unskip location. P009 Ch074 Unskip Press the "SELECT" button to insert the channel. Note: or and Ch029 Unskip Be sure to connect the antenna properly before the channel scan operation. For the connection chart, please see the "Basic Information: System Connection for Recording External Signals" for reference. System Clock Setting 1. [. . . ]