User manual PALSONIC DVDV100

[. . . ] DVD/VCD COMBO INSTRUCTION MANUAL DVDV100 - The region code of this DVD/Video player for home use, is region "4" or ALL. If this mark is displayed when operating the product, please wait for a while, then try it again. If the " DO NOT" mark continues to be displayed when pressing a button, it means the button does not function in the currently played disc. - Select and press a product button on the REMOTE then use the product. [. . . ] Decide if you want to record "ONCE", "WEEKLY" or "DAILY". . . and confirm with [OK] HOW OFTEN DO YOU WANT TO RECORD THIS PROGRAM?ONCE WEEKLY(ONCE A WEEK) DAILY(MON-FRI) DAILY(MON-SAT) DAILY(MON-SUN) PR+/-:SELECT OK:CONFIRM SETUP:END . . Type in one after the other: The programme location number; The time the broadcast starts, The time the broadcast ends, The day of the broadcast, if it is not today. Select LP if you wish to make a very long recording . TIMER PROGRAM (ONCE) PR -START TIME --:-END TIME --:-START DATE --/-TAPE SPEED SP PR+/-:SET(AV) 0-9 :SETUP(PR) </>:CORRECT SETUP:END 3 If you wish to make changes: Move to the position you want to change using the [< / >] buttons. If all setting are ok, press [< or >], till you see "OK : CONFIRM" in the bottom line. Switch your player off. TIMER PROGRAM (ONCE) PR 01 START TIME 18:10 END TIME 20:30 START DATE 18/07(FRI) TAPE SPEED LP PR+/-:SET(AV) 0-9 : SETUP (PR) </>:CORRECT OK:CONFIRM SETUP:END . If you have made a mistake, move to the position you want to change using the [< / >] buttons and change the setting. If programme timings overlap, the machine will give a warning message. If you don't adjust the times, the machine will record the first programme completely then continue with the second one. If there is no sufficient free space for the recording on the cassette the video switches automatically to "LP" for double recording capacity. The recorder will eject cassettes which have the safety tab removed. 26 Timer Recording Timer Review - changing and erasing Call the player's "SETUP", choose "TIMER PROGRAM". TIMER PROGRAM PR 03 01 ------START 21:20 18:10 -- : --- : --- : --- : --- : --- : -END 22:20 20:30 -- : --- : --- : --- : --- : --- : -DATE 19/07 18/07 -- / --- / --- / --- / --- / --- / -- 1 2 PR+/-:SELECT OK:CONFIRM SETUP:END Select the programming to change or erase. If you want to erase this programming press button [0], confirm with OK. If you wish to make changes: Move to the position you want to change using the [< , >] buttons. If all settings are ok, press [< or >], until you see "OK: CONFIRM" in the bottom line. Exit the menus. TIMER PROGRAM (ONCE) PR 03 START TIME 21:20 END TIME 22:20 START DATE 19/07(SAT) TAPE SPEED SP 0 :ERASE </>:CORRECT SETUP:END VCR Operation 27 More Functions The counter counts in real time from the point you load the cassette. If you rewind beyond the zero position, the counter counts in negative values (e. g. -0:01:15). Clock / counter display Each time you press [DISPLAY] button, 1x: Time and date+current status Time and date. . But if you press [CLK/CNT] button, clock and counter on display window will change each other. 14:00 13/07 E180 00:48 If didn't wind tape (PLAY, FF, REW, . . . ), it doesn't appear the tape remain time. "E180 00:48" in the picture opposite means an E-180 cassette is loaded and remaining play or record time is 48 minutes. Remaining time and cassette length TAPE CONTROL TAPE REMAIN GO TO ZERO COUNTER RESET INDEX+ INDEXPR+/-:SELECT OK:CONFIRM SETUP:END TAPE REMAIN E-180 E-240 E-300 PR+/-:SELECT OK:CONFIRM SETUP:END E-240 01:27 . Remaining time display is only possible when the cassette is loaded. When you want the player to show the time remaining from the current player tape position (to find out if there is sufficient space for a recording, for example). To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting this function until you reach the correct length. Accessing counter zero position The player will wind to the position 0:00:00 and stop. REW SP GO TO ZERO 0:02:13 Resetting the counter to zero COUNTER RESET Reset the counter. 0:00:00 28 More Functions and . . . Dimmer : Your player dims its display when switched to stand-by mode. Auto power off : Your player switches to stand-by when no tape is played and no station is received for more than 5 minutes. AUTO REPEAT If you press the [PLAY] button for 5 secs during stop or still mode, it goes Auto repeat mode. [. . . ] Does the display on your video show " " (Ready to timer recording)?(If it was broken, please scotch-tape it) Was a cable data output code connected correctly?Some tapes or discs distributed in the market for lending is set to prevent copy in manufacturing. In case a videotape is positioned in the beginning, "VISS REW" and "REW" do not work. [. . . ]