User manual PALSONIC MODEL 3430G

[. . . ] OWNER'S MANUAL 34CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 3430G Type Tested Electrical Safety AS/NZS 3250 Lic 4163 Standards Australia APP No: N15957 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility. CONTENTS Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can also enter program menu, select Display item and adjust with VOL+/buttons manually to select the desired channel number (from 0~254). In Program menu, please select Fine item and adjust with VOL+ or VOL- buttons until the best picture and sound are obtained. 15 Tuning in (continued) Channel exchange When auto channel preset is finished, you can edit the order of programs by using the channel exchange function. Press VOL+ or VOL- button to select a target channel number that you would like to exchange with the current channel. Now the programs in the current channel and target channel will exchange. You can select the current channel in the Program menu by adjusting Display item. 1 3 2 Setting colour system If the picture colour is abnormal, maybe the colour system setting is wrong. Please enter Program menu and select ColorSys item, then press VOL+ or VOL- button to select a proper colour system. HELP 1 2 3 2 3 Setting sound system If the sound is abnormal, maybe the sound system setting is wrong. Please enter Program menu and select SoundSys item, then press VOL+ or VOL- button to select a proper sound system. Note: Some models are only with one sound system and in this case the sound system does not need to be adjusted. 16 Channel Selection 1. Use Direct Channel Selector (0-9 and -/-- buttons) To select one-digit channel: Press -/-- button repeatedly to display "-". Press 0-9 direct channel selector. 8 To select two-digit channel: Press -/-- button repeatedly to display "--". -- Press 1-9 buttons. -1 Press 0-9 buttons. 18 2 To select three-digit channel: Press -/-- button repeatedly to display "--" --- -- 1 -16 168 1 3 Press 1-2 buttons. Press 0-9 buttons. Press 0-9 buttons. Notes: The maximum channel number is 254, the set does not act if the channel number you input is out of the range of 0~254 or the number you input is out of the range which is limited in SafeMode. 2 2. Use CH+ or CH- button 2 Press CH+ button, the channel number increases; Press CH- button, the channel number decreases. 3. Use previous channel button Press this button to switch between the current channel and previous channel. 17 Adjusting Picture 1. Item Contrast Color Brightness Sharpness Tint* VOLweaker paler darker softer purplish VOL+ stronger deeper lighter sharper greenish 1 3 2 * Note: The item TINT is for NTSC only. Press the | button to select a picture mode according to your favourites. 4. Picture mode Standard 80 50 50 50 50 Dynamic 100 80 100 50 50 Softness 50 50 30 50 50 4 HELP Contrast Color Brightness Sharpness Tint* 1 2 3 2 3 Note: The above parameters maybe different in different models. 18 Sound Control 1. Use VOL+ or VOL- button. Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. 2. Use MUTE button. Press MUTE button, and the volume decreases to half of the original volume before you adjust. This mode is useful when many people are watching TV and one of them is going to answer a telephone call. 1 Press MUTE button again to mute the sound completely. In this mode, you can resume the sound of half of the original volume by pressing VOL+/- buttons. Press MUTE button once again to resume the sound completely. 3 3. Use BREAK button. 1 2 1 Press BREAK button and the TV set goes into break mode. In this mode, the picture will be hidden and the volume becomes to half of the original volume. Pressing BREAK button again or switching to other channel can exit this mode. When you only want to listen to the sound, you can shield the picture to protect CRT. [. . . ] Press VOL+ or VOL- button to select the limitation channel number ranging from 0-254. For example, you can set the limitation channel number to 99, the the user can only select the channel from 0-99. Making use of channel limitation and channel exchange functions, you can limit some channels and turn off the Program menu to forbid other user watching these channels programs. 1 3 2 Setting AdjLimit item Please enter the SafeMode menu and select AdjLimit item. If you set this item to Off, the Picture menu will be shielded in normal watching. [. . . ]