Detailed instructions for use are in the User's Guide.
[. . . ] Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Timer Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can use BAND selection to quicken search process if you know which band your desired progam locates in. Repeat the above steps if you want to store another program in other position numbers
To skip an unnecessary channel
1 3
Press CH+ or CH- button to select POSITION item.
or VOLselect 2 Press VOL+ example, button to 009. a channel number, for channel Press CH+ or CH- button to select SKIP item.
4 Press VOL+ or VOL- button to select ON.
Now channel 9 will be skipped when you browse by CH+ or CH- button.
To restore a skipped channel, please select channel by step 1, 2 then repeat step 3 and 4 and set SKIP item to OFF.
14
Fine tuning
Please enter the SEARCH menu first
Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustment is necessary for better picture and sound, use Fine tuning.
1 3
1, 3 2, 4
Press CH+ or CH- button to select POSITION item.
or VOL2 Press VOL+ fine-tunebuttons to select a channel number you want to (for example, channel 99). Press CH+ or CH- button to select MFT item.
or VOL- button till 4 Press and hold VOL+sound are obtained. the best possible picture and
Calling the on-screen display
You can call the on-screen display by pressing the DSP button on the remote controlle. The first press of the DSP button display the current state (if in TV mode, the current channel number will display) and the next press display the clock time. To resume the sound, press this button again.
!
Notes:
You can also resume the sound by pressing VOL+ or VOL- button.
1
Selecting sound mode
You can quickly select sound mode by pressing S. M button.
2 S. M
NATURAL THEATER NEWS MUSIC
18
Setting WOOFER
1 3
Press MENU button.
2 Press VOL+ or VOL- buttons to select SETTING icon.
Press CH- button to display the SETTING menu.
4 Press CH+ or CH- button to select WOOFER item. 5 Press VOL+ or VOL- button to select ON or OFF.
Setting BALANCE
1 4, 2 2, 5, 3 button 2 Press CH+ or CH-item. to select BALANCE 3
1
Enter the SETTING menu according to the above steps 1-3.
3
Press VOL+ or VOL- button to adjust.
Press VOL+ button, to decrease the left sound channel; Press VOL- button, to decrease the right sound channel.
19
Timer Setting
To enter the TIMER menu
1 3
Press MENU button.
2 Press VOL+ or VOL- buttons to select TIMER icon.
Press CH- button to display the TIMER menu.
Setting CLOCK
Please enter the TIMER menu first.
1
1 1 2, 2
Press CH+ or CH- button to select CLOCK item.
or VOL2 Press VOL+time. button to set current
3
Setting sleep timer
You can quickly set the sleep timer by using the SLP button on the remote controller. With every press of this button the sleep time changes as follows; OFF 120 Min. 10 Min.
SLP
For example, you would like the TV to auto turn off in 60 minutes, you can press the SLP button repeatedly till the screen displays as the right figure. If you want to cancel the sleep timer, you can press the SLP button repeatedly till "OFF" displays on the screen.
SLEEP : 60MIN.
20
Setting OFF TIMER
Please enter the TIMER menu first.
1
Press CH+ or CH- button to select OFF TIMER item.
2 Press VOL+ or VOL- button to select ONCE or EVERY. 4 Press VOL+ or VOL- button to set the OFF time, for example 22:00.
The set auto turns off when the time is 22:00. If you set the OFF TIMER item to ONCE, this function only effects once; If you set the OFF TIMER item to EVERY, this function effects every day. To cancel this function, please set the OFF TIMER to OFF.
1, 3 1, 3, 5 2, 4 2, 4, 6
!
Notes:
The Time can not be accessed until you set the Off Time to Once or Every.
Setting ON TIMER
Please enter the TIMER menu first.
1
Press CH+ or CH- button to select ON TIMER item.
2 Press VOL+ or VOL- button to select ONCE or EVERY. Press VOL+ or VOL- button to select a channel number, for example, channel 10.
The set in STANDBY mode auto turns on and goes to channel 10 when the time is 18:00. If you set the ON TIMER item to ONCE, this function effects only once; If you set the ON TIMER item to EVERY, this function effect every day. To cancel this function, set the ON TIMER to OFF.
!
Notes:
The Time can not be accessed until you set the ON TIMER to ONCE or EVERY. When you are setting the time by VOL+/- button, if you press and release within 0. 7 seconds, the time's increase or decrease step is 1 minute; if you press and hold for more than 0. 7 second, the time increase or decreas step is 10 minute.
21
System Setting
To enter the Setting menu
1 3
Press MENU button.
2 Press VOL+ or VOL- buttons to select SETTING icon.
Press CH- button to display the SETTING menu.
Selecting the OSD language
Please enter the SETTING menu first. This TV set provides ENGLISH ans CHINESE ( 1 1, 3 2, 2, 4 ) OSD language.
1 Press CH+ or CH- button to select LANGUAGE item. 2 Press VOL+ or VOL- button to select the OSD language.
Setting the colour and sound system
Please enter the SETTING menu first.
If the picture colour or sound is abnormal, maybe the colour and sonund system setting is wrong. [. . . ] If you turn over 3 cards with the same value then you win the game, or you will lose the game. If you want to exit the game, please press F2 to pause the game firstly before you press F3.
24
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.
Symptoms
Power is not turned on Poor colour, poor tint Spots appear on the screen Stripes appear on the screen
Check the following items
Be sure the power cord is plugged in. Contrast, colour, tint are not correctly adjusted Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc. Possible interference of electronic interference from another TV set, a computer, an electronics game machine, a broadcast station, etc. [. . . ]