User manual PALSONIC MODEL 76WSHDA 1
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PALSONIC MODEL 76WSHDA 1. We hope that this PALSONIC MODEL 76WSHDA 1 user guide will be useful to you.
Manual abstract: user guide PALSONIC MODEL 76WSHDA 1
Detailed instructions for use are in the User's Guide.
[. . . ] OWNER'S MANUAL
76CM/86CM WIDE SCREEN HDTV READY MODEL: 76WSHDA : 86WSHDA
Type Tested Electrical Safety AS/NZS 3250 Lic 4166 Standards Australia APP No: N18748
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www. palsonic. com. au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888
Contents
Congratulations on your purchase of Palsonic's HDTV ready. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this equipment. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility.
Contents
Cautions for safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] TINT Adjusts for nice skin colour.
Note: TINT is only for NTSC system.
18
Picture adjustment (continued)
Picture adjustment Picture Rotate
When you switch on your TV, there may be a slight tilt of the picture to the left or right. This is due to the earth's magnetic field or position of your TV. To rectify, you can do the following.
1 2 3 4 5
Enter into PICTURE menu. / to select Adjust menu to enter into
Bright Color Peaking Adjust Advanced
Adjust MENU Quit Set
50 50 0 . . . Press CH /
to select Rotate.
Rotate Degauss 6
Press VOL or VOL to rotate the picture leftward or rightward until you rectify it.
MENU Quit Set
+ Ent
Degaussing
If there occurs magnetisation, please do the following to degauss the set:
1 2 3 4
Enter into PICTURE menu and select Adjust menu item. Press CH / to enter into
Rotate Degauss
6
to select Degauss.
Degauss MENU Quit
Set
Ent
Press VOL or VOL button, the degaussing circuit begins to work. If still can not degauss thoroughly, please repeat the above operation after 15-20 minutes until magnetisation disappear.
19
To adjust Advanced menu item
1 2 3 4 5
Enter into PICTURE menu. to select Advanced
Bright Color Peaking Adjust Advanced
Advanced MENU Quit Set
50 50 0 . . . Press CH Press VOL /
to enter into
HEnhance NR DCDI CTI Matrix
Off On MENU Quit Set
to select item. or VOL Function to adjust.
On Auto On On Norm
Ent
Option
Operation
Use VOL / Use VOL / to toggle
Range
On or Off
HEnhance Enhances horizontal details. NR DCDI CTI Matrix CCS COMB Reduces picture noise.
to toggle Off/Low/Mid/High/Auto to toggle to toggle On or Off On or Off
Directional Correlational Deinterlacing. Use VOL / Use VOL / Use VOL / Use VOL /
to toggle Warm/Cold/Normal to toggle to toggle to toggle to toggle On or Off On or Off On or Off On or Off
EditCorr Edit correction for program in FilmMode. Use VOL /
to toggle Off / 0 / 1 / 2 to toggle On or Off
NRDemo Picture noise reduction demonstration. Use VOL /
Note:
When watching moving pictures, do not set NR to MID or HIGH, otherwise the receiving effects will be affected. There is no COMB item when in YCbCr or S-VIDEO input mode.
20
Picture adjustment (continued)
Picture adjustment Picture stillness
Press STILL button to still the current picture, press it again to restore. to select a screen
16:9 4:3 Panorama Zoom 5
16:9/4:3/Panorama/Zoom can be selected. 16:9 mode expands the conventional 4:3 picture into a full 16:9 picture and at the same time still maintains the height of the picture. 4:3 mode leaves conventional 4:3 picture as they are, with black bars on both sides of your screen. Note: In 4:3 display mode, when the current picture's brightness changes largely, there occurs blurry and tingling on picture's left and right sides, or when picture's upper and lower part's brightness differs greatly, there is tilt on picture's sides, these are normal phenomena, it is not necessary to worry about them. PANORAMA mode expands the conventional 4:3 picture into a full 16:9 picture and at the same time still maintains a good aspect ratio at the centre of the screen. This will minimise distortion and produce a remarkable panoramic picture. Zoom mode is recommended for viewing "letter-box" movie (picture with a black bar on the top and bottom) with 16:9 format. [. . . ] After completion of the adjustment, press TEXT/IMAGE button to exit the main menu, or you can wait for some time and the menu will automatically disappear.
To switch between text mode and image mode
1 2
Press TEXT/IMAGE button can switch between Text mode and Image mode. Or you can wait for some time and the OSD will automatically disappear. If you are not satisfied with current status' contrast and brightness, you can adjust them in the main menu.
Sound adjustment
The sound adjustment is same to Operation in RF mode. The audio parameters you have set in RF mode such as Bass, Treble and Loudness also function in XGA mode.
32
Operations examples (continued)
Screen adjustment
The screen adjustment includes H-SIZE, H-PHASE, V-SIZE, VPHASE, PIN-BALANCE, PINCUSHION, TRAPEZOID, PARALLELOGRAM, H-MOIRE, V-MOIRE, ROTATION, etc.
1 2 3 4
Press MENU button to call up the main menu, press CH or CH button to move the cursor to SCREEN ADJUST icon. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PALSONIC MODEL 76WSHDA 1
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PALSONIC MODEL 76WSHDA 1 will begin.