User manual PANASONIC AJ-HVX200P

[. . . ] Memory Card Camera-Recorder Model No. AG- P Before operating this product, please read the instructions carefully and save this manual for future use. F1205S0-H D Printed in Japan ENGLISH VQT0S52 Reference Menu Displays Editing Playback Shooting Preparation Description of parts Operating Instructions Before use CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION: THE AC RECEPTACLE (MAINS SOCKET OUTLET) SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE POWER CORD PLUG FROM THE AC RECEPTACLE. CAUTION: Danger of explosion or fire if battery is mistreated. Replace only with same or specified type. [. . . ] Formatting P2 cards or SD memory cards Insert the card to be formatted into the unit. Repairing defective clips Select the defective clip (indicated by X ) to be repaired. (Clips indicated by the red defective clip indicator cannot be repaired. ) REPAIR CLIP: Select this to repair defective clips. Select YES to repair the clip or NO to cancel the repair, and press the button. EXIT: Select this to return to the last screen. 4 Press the MENU button to release the menu mode. When clips have been copied by operating Explorer, for instance, the "!" indicator may appear on the clips. If this happens, "!" can sometimes be released by downloading the latest version of the P2 viewer from the web site given below, installing it in your computer, and copying the clips again. https://eww. pavc. panasonic. co. jp/pro-av/ 1 On the thumbnail screen, press the MENU button. (Page 64) 2 Select OPERATION using the button, and press the (or and ) button. Playback 3 Select the desired item using the buttons, and press the THUMBNAIL DELETE OPERATION FORMAT PROPERTY REPAIR CLIP META DATA EXIT EXIT and button. DELETE: Select this to delete the selected clip. Select YES to delete the clip or NO to cancel the deletion, and press the button. Select the P2 slot (SLOT1 or SLOT2) or select SD CARD, and press the button. Select YES to format the card or NO to cancel the formatting, and press the button. 69 Thumbnail operations (continued) Checking the clip or card information (PROPERTY) You can perform any of the following operations. Checking the SD memory card information Insert the SD memory card into the unit. Setting the P2 card memory capacity display Checking the version of this system P2 4 To exit the information screen, press the Clip information screen MENU button, use the button to select EXIT, and then press the button. 1 2 3 1 On the thumbnail screen, press the MENU button. (Page 64) 2 Select PROPERTY using the button, and press the (or and ) button. 4 1 Clip number 2 Thumbnail and 5 3 Select the desired item using the buttons, and press the button. 3 Slot number/dubbing mode display 4 Clip information Various indicators that have been added to the clip and also various kinds of data are displayed. ( appears if the P2 card is writeprotected) CLIP NAME: Clip name START TC: Time code value when recording started START UB: User information value when recording started DATE: Date when the recording was made TIME: Time when recording started DURATION: Clip length V_FORMAT: Video signal format FRAME RATE: Playback frame rate REC RATE: Recording frame rate 5 Clip metadata The video and audio formats, videographer information and other detailed data are displayed here. (For details on the clip metadata, see page 57. ) CLIP PROPERTY: The information of the selected clip is displayed. (See details at right. ) CARD STATUS: The P2 card information is displayed. (Page 71) PROPERTY SETUP: Set the method of displaying the P2 card memory capacity. After selecting P2 CARD CAP, select REMAIN (remaining memory) or USED (memory used), and press the button. EXIT: Select this to return to the last screen. 70 P2 P2 card information screen SD memory card information screen 1 2 THUMBNAIL 3 SD OPERATIONSTANDARD : USED PROPERTY BLANK META DATA : SUPPORTED : 96 KB : 122. 3 MB : 122. 4 MB ! EXIT TOTAL NUMBER OF CLIPS PROTECT OK : : OFF 4 1 Write protection mark 2 P2 card status The amount of memory remaining on the P2 card is displayed using a percentage bar. [. . . ] Do not place substances or equipment with strong magnetic fields near cassettes. Tapes are surfaced with microscopically small magnetic particles where the signals are recorded. Magnetic necklaces, toys and other products may have an unexpectedly strong magnetic field and this may cause data loss or generate noise on the screen and in the sound. SD memory cards After ejecting an SD memory card from the unit, be absolutely sure to stow it in its own case. [. . . ]