User manual PANASONIC CQ-CB8901U

[. . . ] ® WMA MP3 CD Player/HD-Radio Receiver with Full Dot Matrix Motorized Display CQ-CB8901U ® Operating Instructions CQ-CB8901U Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way, Secaucus, New Jersey 07094 http://www. panasonic. com ¡Please read these instructions (including "Limited Warranty" and "Customer Services Directory") carefully before using this product and keep this manual for future reference. SRC CQ-C8401U TEXT YEFM285625A ND1204-1015 Printed in China Safety Information Read the operating instructions for the unit and all other components of your car audio system carefully before using the system. They contain instructions about how to use the system in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual. This manual uses pictographs to show you how to use the product safely and to alert you to potential dangers resulting from improper connections and operations. It is important that you fully understand the meanings of the pictographs in order to use this manual and the system properly. Caution Observe the following cautions when using this unit. Keep the sound volume at an appropriate level. Keep the volume level low enough to be aware of road and traffic conditions while driving. Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. [. . . ] Indicates the intensity of the radio wave. Artist name/Song title 3 Press [MENU] to confirm the adjustment. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. Functions Only by Remote Control Unit Channel Preset (P·SET: Preset) Up to 6 channels can be preset in XM1 to XM3 respectively. Preset channels can be simply called up by pressing [}] (P·SET) or [{] (P·SET). Note: Direct selection can be executed with [1] to [6] buttons on remote control. 4 Preset the channel by holding down [}] or [{] for 2 sec. Note: To suspend direct selection, press [DISP] (Display). 1 Tune into a channel. 3 Select a preset number by pressing [}] or [{]. Preset number/channel number blinks once. ¡ In step 2, a channel can be stored by holding down one of the preset buttons [1] to [6] for 2 sec. ¡ To stop presetting channels, press [DISP] (Display). 28 CQ-CB8901U CQ-CB8901U XM Tuner 29 Preset Number 2 Press [BAND] (SET) to adjust. Disc Changer (When CDs or MP3 discs are loaded) Connected an optional CD changer or an optional DVD changer can be controlled by this unit. 1 Load a magazine (discs). When a magazine is already loaded, press [SRC] (Source) to select the CD mode. Note: The changer is automatically turn on when the magazine is inserted. SRC CQ-CB8901U Notes: ¡ Please connect a CD changer or a DVD changer to AUX 2. ¡ "AUX 2" is display when connecting a changer that is not compatible with this unit. ¡ When CX-DP880 or CX-DH801U is connected, a CD-RW disc is playable. ¡ Trouble may occur while playing CD-Rs. Refer to the section on "Notes on CD/CD Media (CD-ROM, CD-R, CD-RW)". (a page 44) ¡ This unit does not support the following through the CD changer. ¡MP3 playback. Operation Flow 2 Select a desired portion. Random, Repeat Play (Disc Changer Menu Display) Disc selection [}]: Next disc [{]: Preceding disc Random and Repeat play can be set. 1 Press [MENU] to display the menu display. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. CQ-CB8901U RANDOM (Only for CD-DA) : Off : Random playback (from whole magazine: CD-CH) (from selected disc: DVD-CH) Track selection [7]: Next track/file [6]: Preceding track/file (press twice) Note: Hold down for fast forward/reverse. RANDOM (Only for MP3 disc) : Off : Random playback (from selected folder) 2 Press [}] or [{] to select a mode to be (RANDOM, REPEAT) Pause Press [BAND] (y / 5). Press again to cancel. adjusted. DISC RANDOM (Only for CD changer) : Off : Random playback (from selected disc) 3 Press [BAND] (SET) to adjust. CQ-CB8901U REPEAT : Off Track number Disc number Changer indicator (CD changer) Time 4 Press [MENU] to : Playing the current track/file repeatedly confirm the adjustment. For using the remote control, hold down [SEL] (MENU) for 2 sec. or more. DISC REPEAT : Off : Playing the current disc repeatedly FOLDER REPEAT (Only for MP3 disc) : Off : Playing the current folder repeatedly CD Changer Mode Display (DVD changer) Functions Only by Remote Control Unit Play Mode indicators lights when the changer is connected. (Only for CD changer) Play Mode Selection One-touch operation is available for selecting a track playing style by use of [RANDOM] or [REPEAT]. DISC SCAN (1st track in each disc, only for CD changer) Hold down [SCAN] for 2 sec. Press again to cancel. Direct Access A disc can be directly selected. Note: To suspend direct selection, press [DISP] (Display). DISC RANDOM, DISC REPEAT Hold down the button for 2 sec. Hold down again to cancel. (Disc Random) (Disc Repeat) (Disc Scan) SCAN play (Only for CD-DA) You can find your favorite track by playing first 10-sec. of each track. SCAN (CD changer: All tracks, DVD changer: from selected disc) Press [SCAN]. [. . . ] Installation Precautions This product should be installed by a professional installer, if possible. In case of difficulty, please consult the shop where you purchased the product. This system is to be used only in a 12-volt, DC battery system (car) with negative ground. Be sure to connect the battery lead (yellow) to the positive terminal (+) of the battery or fuse block (BAT) terminal. [. . . ]