User manual PANASONIC CQ-DF802

[. . . ] E N G L I S H 1 Before Use and Preparations Notes for the touch panel When operating You must use your fingers to touch the panel and perform operations. If you do so, you may damage or break the glass on the top surface of the touch panel. Do not allow the top surface of the touch panel to be caught by your fingernails or any hard objects. If you do so, you may damage or break the glass on the top surface of the touch panel. [. . . ] 2 Press SET /[SET] to set. 2 Submenu or 1 Press / [%] or [$] to select "REPEAT". 2 Press SET /[SET] to set. 3 Setting Press or /["] or [#] to change setting. : Cancel Direct setting on the remote control unit when the menu is not displayed Press [6] (REPEAT) to change setting. (When you press a button, the screen on the left is displayed for 2 seconds. ) Press or /["] or [#] to change setting. : Cancel Random Play Default: RAND OFF or 1 Press / [%] or [$] to select "RANDOM". Off: (Displayed for 2 seconds. ) Only for the remote control unit When the menu is not displayed Press [5] (SCAN) to change setting. On: The first 10 seconds of each track plays in sequence. Scan Play Default: Off Off: Cancel (Displayed for 2 seconds. ) Blinks. [DISP] (Display) [5] (SCAN) [4] (RANDOM) [6] (REPEAT) SOURCE PWR BAND RETURN RET MENU FACE S·A DIMMER DISP DIM 1 2 3 4 RANDOM 5 SCAN 6 REPEAT VOL 7 8 9 0 NUMBER MUTE [MENU] [%] [$] (Menu/submenu) ["] [#] (Setting) [SET] Car Audio 26 SE T CQ-DF802W CQ-DF802W 27 E N G L I S H 13 CD Changer Control CD changer functions are designed for optional Panasonic CD changer unit. Note: Loading a magazine when the power is off allows the power to be turned on. Ejecting the magazine when the unit is in the CD changer mode allows the power to be turned off. This unit does not support CD-ROM, CD-R or CD-RW playback through the CD changer. CD changer mode display Repeat and random indicator (When a CD changer is connected and a magaDisc number Track number zine is in the changer. ) Press SOURCE /[SOURCE] to SOURCE change to CD changer mode. Playback starts automatically. Direct Disc Selection Only for the remote control unit Example: disc number 10 1 Press [, , ] (NUMBER). E N G L I S H 14 2 Press [1] [0]. 3 Press [SET] to set. The first track of the corresponding disc starts playing. Note: Press DISPLAY /[DISP] (display) or [, , ] (NUMBER) to return to the regular mode. If a non-existent disc number is input and entered, the command is invalid and the display returns to regular mode. 1 CD Changer Mode Note: : Load a magazine with CDs. : Magazine is ejected in the CD changer mode. Press DISC or TRC to change the cursor. DISC MOSFET SOURCE DISPLAY TRC (Track) Display Change Press DISPLAY /[DISP] (display) to change the display. Disc/track number (Default) Track playing time Clock display 50W X 4 MENU VOL BAND APM/ ;/ 1 (Disc) (Track) Note: Press DISPLAY /[DISP] (display) to return to the regular mode. 2 Disc Selection /["]: Next disc. /[#]: Previous disc. DISPLA (SOURCE) SOURCE PWR BAND RETURN RET MENU Y FACE S·A DIMMER 3 Track Selection Track Search Press and hold. /[$]: Fast forward /[%]: Fast backward Release to resume the regular play. [DISP] (Display) [, , ] (NUMBER) DISP DIM [%] [$] (Track) ["] [#] (Disc) [SET] [0] to [9] (Disc number) 1 2 3 4 RANDOM 5 SCAN 6 REPEAT VOL 7 8 9 /[$]: Advance to the next track. (Press twice. ) 0 NUMBER MUTE Car Audio 28 SE T CQ-DF802W CQ-DF802W 29 E N G L I S H 15 CD Changer Control (Continued) Menu Setting on CD Changer Mode 1 Menu VOL 1 [MENU] MOSFET 2 Submenu MOSFET 3 Setting 50W X 4 MENU 50W X 4 MENU VOL VOL BAND APM/ ;/ 1 BAND APM/ ;/ 1 2 SET : Lights during menu play setting. : Lights during CD changer menu mode. 1 2 SET 1 (Submenu) RTN EXIT Note: Press EXIT /[MENU]/[MENU], [DISP] (display) to return to the regular mode. [. . . ] : Bright : Medium : Dark (See page 32 for information on changing the brightness of the entire front panel. ) OPEN Direct setting on the remote control unit when the menu is not displayed Press [DIM] (DIMMER) to change setting. (When you press a button, the screen on the left is displayed for 2 seconds. ) VOL MENU BAND 50W X 4 MENU VOL BAND on APM/ ;/ 1 Default: DIMMER 3 Setting range: DIMMER 1 to 3 on APM/ ;/ 1 Press or /["] or [#] to change setting. : S·A off (regular display) : S·A 1 : S·A 2 : S·A 3 : S·A 4 : S·A 5 Press [S·A] to change setting. (When you press a button, the screen on the left is displayed for 2 seconds. ) Spectrum Analyzer (S·A) Display Pattern Default: KEY Variety: KEY, PATTERN 1 to 5 1 Press [MENU]. [. . . ]