User manual PANASONIC KX-T7885

[. . . ] Caller ID Please read these operating instructions before using the unit and save them for future reference. TCD150E(E). book Page 2 Wednesday, May 25, 2005 4:58 PM Introduction Thank you for purchasing a new Panasonic digital cordless phone. For your future reference Attach or keep original receipt to assist with any repair under warranty. (found on the bottom of the unit) Date of purchase Name and address of dealer Note: L This equipment is designed for use on the UK and Republic of Ireland analogue telephone network. L In the event of problems, you should contact your equipment supplier in the first instance. [. . . ] Digits will be cleared from the right. Display language To change the display language 6 {>} i {ih} 1 2 3 4 5 {j/OK} "SETTING HS" ({v}) i {>} "DISPLAY OPT" i {>} "LANGUAGE" i {>} Select the desired language. i {>} i {ih} Note: L If you select a language you cannot read, reset the handset to its default settings: - {j/OK} i {v} i {>} i {e} i {>} - Enter handset PIN (default: "0000"). 01289 8333 7 TCD150E(E). book Page 8 Wednesday, May 25, 2005 4:58 PM Making/Answering Calls Making/Answering Calls Making calls 1 Dial the phone number. i {C} 2 When finished talking, press {ih} or place the handset on the base unit. Redialling/storing/editing before calling/erasing 1 {R} i Select the item ({v}). 2 Redialling: {C} Storing: {>} i "SAVE TEL NO" i {>} i {j/OK} i Enter the name (9 characters max. ; page 9). i {j/OK} Editing before calling: {>} i "EDIT CALL NO" i {>} i Edit the number. i {C} Erasing: {>} i "CLEAR"/"ALL CLEAR" i {>} i "YES" i {>} i {ih} Answering calls 1 Press {C} to answer the call. L You can also answer a call by pressing any dial key from {0} to {9}, {*}, {#}, or {INT}. (Any key answer feature) 2 When finished talking, press {ih} or place the handset on the base unit. 2 To stop paging, press {x} on the base unit or press {C} on the handset. Key lock The handset can be locked so that no calls or settings can be made. Incoming calls can be answered, but all other functions are disabled while key lock is on. To turn key lock off, press {j/OK} for about 2 seconds. To adjust the receiver volume Press {e} or {v} while on a call. Pause button (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. {6} Feature (Default setting) Call restriction*3 Setting call restriction - Enter base unit PIN (default: "0000"). i {1} i {>} - Enter the phone number to be restricted (8 digits max. ). L To select a different memory location, press {>} repeatedly and enter a number. - {>} Turning on/off call restriction - Enter base unit PIN (default: "0000"). Flashing number indicates call restriction is on; non-flashing number indicates call restriction is off. i {>} Emergency number ("112", "999")*4 - Enter base unit PIN (default: "0000"). L To select a different memory location, press {>} and enter a number. i {>} {*} Time and date: page 7 *1 Only the emergency number setting will not be reset. *2 If you change the PIN, please write down your new PIN as the unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre. *3 Call restriction feature restricts the handset from dialling certain phone numbers. [. . . ] Cause & solution L Make sure that the batteries are installed correctly (page 5). L Locate the handset and the base unit away from other electrical appliances. We recommend connecting a filter (contact your DSL service provider) to the telephone line between the base unit and the telephone line jack. L You are using the handset or base unit in an area with high electrical interference. [. . . ]