User manual PANASONIC KX-TS550

[. . . ] Dial a telephone number. If you misdial, hang up and start again from step 1. 2-B Answering Calls 1 2 When the unit rings, lift the handset. When finished talking, hang up. (REDIAL) Button (2-A) When finished talking, hang up. Attach your purchase receipt here. 3 Speed Dialer If you misprogram Hang up. ¤ Restart from step 1. " Speed Dialer 3-B Dialing a Stored Number 1 2 3 Lift the handset. Press the memory station number ((0) to (9)). The stored number is dialed. [. . . ] Speed Dial Card Remove the speed dial card and use it as a name or phone number index for the stored numbers. 1 2 3 4 5 6 Lift the handset. When finished, hang up. To store other numbers, repeat steps 1 through 6. If you misprogram Hang up. ¤ Restart from step 1. To erase a stored number Lift the handset. ¤ Press (PROGRAM) ¤ ¤ the one-touch auto dial button ((M1), (M2) or (EMERGENCY)) of the phone number to be erased ¤ (PAUSE) ¤ (PROGRAM). ¤ Hang up. PQQX13992ZA F0803-0 D If a pause is required for dialing, press (PAUSE) in step 5. For assistance, please call: 1-800-211-PANA(7262) For assistance, please call: 1-800-211-PANA(7262) For assistance, please call: 1-800-211-PANA(7262) 5 Special Features 5-C Using the PAUSE Button (For PBX Line/Long Distance Calls) We recommend you press (PAUSE) if a pause is required to dial with a PBX or to make a long distance call. Line access number (9) (PBX) (9) ¤ (PAUSE) ¤ Phone number Pressing (PAUSE) once creates a few seconds pause. Pressing (PAUSE) more than once increases the length of the pause between numbers. 6 1 Things You Should Know 3 Connect the telephone line cord. Mount the unit, then slide down. Fasten the cord to prevent it from being disconnected. 2 " Things You Should Know 6-B Troubleshooting Problem Remedy Check the settings (1-B). Check whether the DIALING MODE selector setting is correct or not (1-B). Do not enter a phone number more than 21 digits long, or the entered number and the previously stored number will be cleared. Problem Remedy The other party (PROGRAM) was pressed suddenly cannot during the conversation. You cannot If the last number dialed redial by was more than 31 digits pressing long, the number will not (REDIAL). If you cannot solve your problem Call our customer call center at 1-800-211-PANA(7262). Panasonic's e-mail address for customer inquiries: consumerproducts@panasonic. com for customers in the USA or Puerto Rico ONLY 5-A For Call Waiting Service Users Press (FLASH) if you hear a call-waiting tone while talking. The first call is put on hold and you can answer the second call. To return to the first caller, press (FLASH) again. 6-A Wall Mounting The unit can be mounted on a wall. Press the tabs in the direction of the arrows (1), then remove the wall mounting adaptor (2). 5-B Temporary Tone Dialing (For Rotary or Pulse Service Users) Press ($) (TONE) before entering access numbers which require tone dialing. The dialing mode changes to tone. You can enter numbers to access answering services, electronic banking services, etc. Access numbers entered after pressing ($) (TONE) will not be included when redialing. Wall Phone Plate To temporarily set the handset down during a conversation, place it as shown here. 1 1 1 Hooks 2 Tuck the telephone line cord inside the wall mounting adaptor, and push it in the direction of the arrow (1 and 2). The word "UP WALL" should face upward. 2 1 6 Things You Should Know 6-D Helpful Information From telephone line " Things You Should Know When you ship the product Carefully pack your unit, preferably in the original carton. Symptom 7 1 2 Referencia Rápida 3 Coloque el selector del DIALING MODE a TONE (tono). Si Ud. [. . . ] If the known working phone does not operate properly, consult your telephone company. For product service Call 1-800-211-PANA(7262) or 1-800-833-9626 for the location of an authorized servicenter. Panasonic's e-mail address for customer inquiries: consumerproducts@panasonic. com for customers in the USA or Puerto Rico ONLY Para ajustar el volumen del auricular (6 niveles) mientras habla Para aumentar, presione (^). [. . . ]