User manual PANASONIC KXHNS103
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC KXHNS103. We hope that this PANASONIC KXHNS103 user guide will be useful to you.
Manual abstract: user guide PANASONIC KXHNS103
Detailed instructions for use are in the User's Guide.
[. . . ] A B C *1 *2 *3 A Accessory item/Part number Battery*1 Wall mounting adaptors*2 Wall mounting screws (25 mm (1 inch))*3/XTB4+25AVW Quantity 1 2 3
When replacing the battery, see âPower sourceâ of âSpecificationsâ, page 19 for battery information. 1 adaptor for the main unit: PNHR2107Z 1 adaptor for the probe unit: PNHR2108Z 2 screws for the main unit and 1 screw for the probe unit B C
Other information
R Design and specifications are subject to change without notice. R The illustrations in these instructions may vary slightly from the actual product. R Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] F G
Main unit Main unit cover M N Used to confirm the status of the sensor or register the sensor to the hub. LED indicator Cable Probe unit Probes
Setup overview
1
Initial setup Make sure you can access the system using your mobile device. Confirm the usage area Read the information in this document to confirm that the desired installation area is suitable to proper operation. 2 3
4
LED indicator
N and check the You can press M LED indicator to confirm the sensorâs status. After confirming the sensorâs status, we recommend turning the LED indicator
5
8
For assistance, please visit www. Registering the sensor
This procedure is not required for devices that were included as part of a bundle. You can register each device by using the registration buttons or the [Home Network] app. Using registration buttons 1 Hub:
2
OTHER Press and hold M DEVICEN until the LED indicator blinks in green. Sensor: Remove the main unit cover and press and hold M N until the LED indicator blinks in green (page 8). Note: R To cancel without registering the N on the hub and sensor, press M on the sensor again. Using the app
When you register the sensor by using the [Home Network] app, you can assign a name to your devices and
For assistance, please visit www. Pdf 12
2015/02/03 20:01:37
Setup Securing with the wall mounting adaptors 1 Use screws to attach the wall mounting adaptors to the wall. N Main unit 1 Screws 2 75 mm (2 15/16 inches) n Probe unit 1 Screw
1 2
1
1
Note: R To install the probe unit on a floor, see page 16. In this case, you will not use the probe unitâs wall mounting adaptor. Pdf 13
2015/02/03 20:01:37
Setup 2
Remove the backing from the double-sided tape, insert the main unit and the probe unit into the wall mounting adaptors, and then press firmly on each unit to ensure solid adhesion to the installation surface. Pdf 14
2015/02/03 20:01:37
Setup Securing with double-sided tape only
Note: R Make sure any surfaces that will make contact with the double-sided tape are clean and dry before applying the tape. Android⢠devices Tap or press your mobile deviceâs menu button in the appâs home screen. Note: R Microsoft® Windows® Internet Explorer® 8 and earlier versions are not supported. R You can also access the Userâs Guide at the web page listed below. Features available when using the [Home Network] app
Some of the sensorâs features that are available when using the [Home Network] app are listed below. Â Alarm system You can use the app to arm and disarm the alarm system, confirm the current status of the sensor, and view a log of previous events. Â Sensor integration You can configure the sensor to trigger other system events, such as camera recording, turning on an electric device (such as a lamp), etc. [. . . ] The decision to repair, replace or refund will be made by the warrantor. Parts Labor Home Network System Products One (1) Year One (1) Year microSD card (Included model only) 90 days N/A During the âLaborâ Limited Warranty period there will be no charge for labor. During the âPartsâ Limited Warranty period, there will be no charge for parts. You must mail-in your product prepaid during the Limited Warranty period. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC KXHNS103
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC KXHNS103 will begin.