User manual PANASONIC KX-PRWA10E

[. . . ] A B C D *1 *2 A Accessory item/Part number AC adaptor/PNLV226CE Telephone line cord Rechargeable batteries*1 Handset cover*2 Quantity 1 1 2 1 See page 3 for replacement battery information. B C D Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information. Accessory item Rechargeable batteries Model number HHR-4MVE or HHR-4MY*1 Battery type: – Nickel metal hydride (Ni-MH) – 2 x AAA (R03) size for each handset KX-A405 KX-TGA20FX*2 DECT repeater Key finder *1 *2 Replacement batteries may have a different capacity from that of the supplied batteries. By registering the key finder (4 max. ) to a Panasonic Digital Cordless Phone and attaching it to an easy-to-lose item in advance, you can locate and find the mislaid item to which the key finder is attached. [. . . ] If you select the unit’s region setting (page 30) to “Česká rep. ” or “Slovensko”, the default setting will be changed for the selected country. If you select the unit’s region setting (page 30) to “Česká rep. ” or “Slovensko”, the default setting is “On”. This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. (Caller ID subscribers only) To use this feature, set the date and time first (page 12). For models with supplied key finders, the display shows “1:Finder1”. Wallpaper is displayed in the standby mode only when you select “Digital(Small)” or “Off” for this setting. You can select to display either a single item or multiple items on one screen at a time for the handset main menu icons in function menu, phonebook list, caller list, and redial list. – “Off”: Backlight turns off after 10 seconds of charging. If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature. The default setting will be as follows if you select the following regional codes when changing the unit’s region setting (page 30): “Česká rep. ” = “100 msec. ” “Slovensko” = “100 msec. ” To prevent other users from joining your conversations with outside callers, turn this feature on. 25 PRS110FX(en)_0725_ver020. pdf 25 2013/07/25 9:56:12 Programming *18 This menu is not displayed when scrolling through the display menus. *19 This menu icon is displayed when the key finder is not registered. Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). MOKN a M N n By entering phone numbers: 1 MMenuN (right soft key) #217 a MAddN 2 3 Enter the phone number (24 digits max. ). a MOKN M N Viewing/editing/erasing bar call numbers 3 1 2 3 MMenuN (right soft key) #217 MbN: Select the desired entry. a MOKN a M N To erase a number: MEraseN a MbN: “Yes” a MOKN a M N Incoming call barring This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call barred list, the unit emits no sound to the caller, and disconnects the call. (Caller ID subscribers only) 27 PRS110FX(en)_0725_ver020. pdf 27 2013/07/25 9:56:12 Programming Baby monitor This feature allows you to listen in on a room where another handset is located, allowing you to easily monitor from different areas of the house or place. The monitored handset (placed in a baby’s room, for example) will automatically call the monitoring handset or the phone number stored when it detects sound. Important: R You should perform a test run of the baby monitor procedure to ensure that the baby monitor feature is set correctly. Check the connection if you are diverting the baby monitor to an outside line. Note: R Both the monitored and monitoring handsets must select the same base unit in order to use the baby monitor feature (page 32). R If the unit is connected to a PBX system, you cannot set the baby monitor. [. . . ] I fully charged the batteries, but – still flashes or – the operating time seems to be shorter. R Clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again. R It is time to replace the batteries (page 9). Making/answering calls, intercom Problem is displayed. R Activating one touch eco mode reduces the range of the base unit in standby mode. [. . . ]