User manual PANASONIC KX-TC1484B

[. . . ] 900MHz Cordless Phone Preparation Operating Instructions Model No. KX-TC1484B Pulse-or-tone dialing capability Basic Operation Advanced Operation Useful Information Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 15 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 34 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller's name and phone number. [. . . ] The handset beeps for 1 minute and "PAGING" is displayed on the handset. To stop paging, press (HANDSET\LOCATOR) again or press (OFF) on the handset. Temporary Tone Dialing (For Rotary or Pulse Service Users) Press ($) before entering access numbers which require tone dialing. The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. For assistance, please call: 1-800-211-PANA(7262) 25 " Special Features How to Use the PAUSE Button (For PBX Line/Long Distance Calls) We recommend you press (PAUSE/REDIAL) if a pause is required for dialing with a PBX or to make a long distance call. Ex. Line access number (9) (PBX) (9) ¤ (PAUSE/REDIAL) ¤ Phone number Pressing (PAUSE/REDIAL) once creates a 3 second pause. Pressing (PAUSE/REDIAL) more than once increases the length of the pause between numbers. For Call Waiting Service Users Press (­­­/FLASH) if you hear a call-waiting tone while talking. The first call is put on hold and you can answer the second call. The call waiting service cannot be used when a parallel connected telephone is in use. If this function does not operate properly, consult your telephone company for details. Call Waiting Caller ID Feature Call Waiting Caller ID Feature allows your unit to display the second caller's information. After you hear a call-waiting tone while talking, the unit will display the caller's name, the phone number and the date and time received. BROWN, NANCY Please contact your telephone company for details and availability in your area. 26 Belt Clip You can hang the handset on your belt or pocket using the belt clip. To attach the belt clip To remove the belt clip Optional Headset Plugging an optional headset into the handset allows a hands-free phone conversation. To order, call the accessories telephone number on page 2. Connecting an optional headset to the handset Open the headset jack cover, and connect an optional headset to the headset jack as shown below. Useful Information The illustration of the headset is KX-TCA86. Headset Jack When an optional headset is connected to the handset, make sure to use the headset to talk with the caller. If you want to have a normal cordless phone conversation, disconnect the headset. For assistance, please call: 1-800-211-PANA(7262) 27 Wall Mounting This unit can be mounted on a wall phone plate. 1 Push the lower side of the hook (1) and pull down the hook until it locks (2), so the tab holds the handset. 2 1 2 3 Remove the wall mounting adaptor. 2 1 Connect the AC adaptor. Tuck the telephone line cord inside the wall mounting adaptor, then push it in the direction of the arrow (1 and 2). The word "UP WALL" should face upward. Mount the unit, then slide down. Raise the antenna. Wall Phone Plate 28 5 To charge the battery: Fit the handset hole in the tab (1) and fix the charge contacts (2). Make sure to place the handset with the keypad facing down. 1 Hole Tab 2 Adding Another Phone This unit will not function during a power failure. To connect a standard telephone on the same line, use the Panasonic T-adaptor KX-J66. To order, call the accessories telephone number on page 2. Standard Telephone Useful Information Single-Line Telephone Jack Telephone Line Cord T-Adaptor (KX-J66) For assistance, please call: 1-800-211-PANA(7262) 29 Battery Replacement If "RECHARGE" and " " are displayed after a few telephone calls even if the battery was fully charged, replace the battery with a new Panasonic PQWBTC1461M (P-P504) battery. To order, call the accessories telephone number on page 2. 1 Press the notch on the handset cover firmly (1) and slide it as indicated by the arrow (2). 1 2 2 Remove the old battery. Then install the new one. Insert the battery plug into the connector as shown in the picture. Be sure wires are free from being pressed by the battery body or handset cover. Make sure you charge the new battery for about 15 hours. A nickel cadmium battery that is recyclable powers the product you have purchased. At the end of its useful life, under various state and local laws, it is illegal to dispose of this battery into your municipal waste stream. [. . . ] During the "Parts" warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold "as is". [. . . ]