User manual PANASONIC KX-TC1743B

[. . . ] After subscribing to Caller ID this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting with Caller ID services (CWID). Attach your purchase receipt here. Copyright: This material is copyrighted by Panasonic Communications Co. , Ltd. , and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co. , Ltd. © 2004 Panasonic Communications Co. , Ltd. For hearing or speech impaired TTY users, call 1-866-605-1277. A AC Adaptor (p. [. . . ] For assistance, please call: 1-800-211-PANA(7262) 55 Intercom During an intercom call: · If you have difficulty hearing while using the speakerphone on the handset or base unit, decrease the speaker volume by pressing [d]. · If an incoming call is being received, you will hear 2 tones (incoming call tone, p. To answer the call; -- if using the handset, press the called line soft key ( LINE1 ) or ( LINE2 ). -- if using the base unit, press the called line button. Answering Intercom Calls Handset When a handset is paged, it rings and the Ringer/Message Alert indicator flashes rapidly. The display shows the calling extension. 1 Press [C], [s] or [HOLD/INTERCOM]. · You can also answer a page by pressing any button except [d], [B] or [OFF]. Ex. Handset 2 calling Call from HS[2] 2 To disconnect the intercom, press [OFF]. · If the Auto Talk feature is turned on (p. 23), you can also answer a page by simply lifting the handset off the base unit or charger (for KX-TG6502 or accessory handset users, p. 3). Base Unit When the base unit is being paged, it rings and the LOCATOR/INTERCOM/ TRANSFER indicator flashes. 1 Press [SP-PHONE] or [LOCATOR/INTERCOM/TRANSFER]. 2 To disconnect the intercom, press [SP-PHONE] or [LOCATOR/INTERCOM/TRANSFER]. · The ringer volume for intercom calls follows the higher level of the 2 lines. 24, 25), the handset and the base unit will ring at the low level for intercom calls. · When the base unit user pages all handsets, only the handset user who answers first can talk with the base unit user. 56 Intercom Voice Paging Base Unit The base unit user can make a voice announcement that is heard through the speakers of all handsets. (The caller will hear the greeting and can leave a message after the beep. ) Answering System Useful Information 59 For assistance, please call: 1-800-211-PANA(7262) Transferring a Call Quick call transfer You can transfer a call without waiting for the paged party to answer. Handset 1. Press the extension number ([0] for the base unit, [1] to [4] for the handset). Press the extension number [1] ( ) to [4] ( ), or press [0] to page all handsets. Press [SP-PHONE] to hang up. · The call will be transferred directly. · The paged party can answer the transferred call: -- for the handset, press [C], [s], or the line soft key ( LINE1 ) or ( LINE2 ). · If the paged party does not answer: -- for the handset, press the line soft key ( LINE1 ) or ( LINE2 ) to return to the outside call. -- for the base unit, press the line button that is flashing to return to the outside call. · If the paged party does not answer within 60 seconds after you hang up, your phone will ring and the call will be returned to your phone. You may speak to the caller again by pressing the line soft key ( LINE1 ) or ( LINE2 ) on the handset, or the line button on the base unit. If you do not answer the call within 4 minutes, the call will be disconnected. After speaking to the caller, you may also transfer the caller to the Answering System by performing the following steps: (1) Press [HOLD/INTERCOM] on the handset or [LOCATOR/INTERCOM/ TRANSFER] on the base unit. [. . . ] A TIA/EIA-IS-968 compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack that is also TIA/EIA-IS-968 compliant. · Environment -- do not place the unit in a room where the temperature is less than 5°C (41°F) or greater than 40°C (104°F). Allow 10 cm (4") clearance around the unit for proper ventilation. [. . . ]