User manual PANASONIC KX-TCD430

[. . . ] Digital Cordless Phone Operating Instructions Model No. KX-TCD430E This unit is Caller ID compatible. To display the caller's phone number, you must subscribe to Caller ID service. Charge the batteries for about 7 hours before initial use. Please read these Operating Instructions before using the unit and save them for future reference. Table of Contents Preparation Accessory information . 01289 8333 Preparation Preparation Accessory information Thank you for purchasing a new Panasonic digital cordless phone. Sales and Support Information Customer Care Centre L For UK customers: 08700 100 076 L For Republic of Ireland customers: 01289 8333 L Visit our website for product information: www. panasonic. co. uk L E-mail: customer. care@panasonic. co. uk Direct Sales at Panasonic UK L Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday - Friday, 9:00 am - 5:30 pm. [. . . ] No dialling is necessary. 3 Press {v} repeatedly to display "DISPLAY OPT", then press {>}. 4 Press {v} repeatedly to display "LANGUAGE", then press {>}. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 5 Press {v} repeatedly to select the desired language, then press {>}. 3 Press {v} repeatedly to display "CALL OPT", then press {>}. 6 Press {ih}. Note: L If you select a language you cannot read, reset the handset to its default settings (page 19). 4 Press {v} repeatedly to display "DIRECT NO", then press {>}. 5 Enter a phone number (24 digits max. ). L To correct a mistake, press {C}. Digits are cleared from the right. Call options Setting call bar This feature prohibits making outside calls. When call bar is turned on, only intercom calls and emergency calls can be made. Note: L When this feature is turned on, only the direct call number can be called. L While this feature is turned on, the following will be displayed. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 18 Helpline Tel. 01289 8333 Useful Telephone Settings Turning direct call on/off 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 3 Press {v} repeatedly to display "OTHER OPT", then press {>}. 3 Press {v} repeatedly to display "CALL OPT", then press {>}. 4 Press {v} repeatedly to display "AUTO TALK", then press {>}. 4 Press {v} repeatedly to display "SET DIRECT", then press {>}. 5 Press {v} repeatedly to select "ON" or "OFF", then press {>}. 5 Press {v} repeatedly to select "ON" or "OFF", then press {>}. 6 Press {ih}. Setting the battery type "NI-MH": Select when nickel metal hydride batteries are installed. "NI-CD": Select when nickel cadmium batteries are installed. 6 Press {ih}. Other options Changing the handset PIN (Personal Identification Number) The handset's default PIN is "0000". Important: L If you change the PIN, please write down your new PIN as the unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 3 Press {v} repeatedly to display "OTHER OPT", then press {>}. 4 Press {v} repeatedly to display "BATTERY TYPE", then press {>}. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 5 Press {v} repeatedly to select the desired setting, then press {>}. 6 Press {ih}. Resetting the handset to its default settings 3 Press {v} repeatedly to display "OTHER OPT", then press {>}. 4 Press {v} repeatedly to display "HSPIN CHANGE", then press {>}. 5 6 7 8 Enter the current 4-digit handset PIN. 2 Enter "0000" (default handset PIN). L If you changed PIN, enter it (page 19). 3 Press {v}, {>} and {ih}. Note: L For the default settings, see page 15. L The battery type setting will not be reset. Setting auto talk This feature allows you to answer calls simply by lifting the handset off the base unit. 01289 8333 19 Useful Telephone Settings Guide to base unit settings For your reference, a chart of all items which can be customised for the base unit is printed below. {0} {1} Feature (Default setting) Reset base unit Set all or selected handsets to ring (All handsets ring) Base unit ringer volume (Medium) Time break recall or earth recall (Time break recall) Pause length (3 seconds) {5} Change base unit PIN ("0000") Call restriction Emergency number ("112" and "999") {7} {*} Cancel a handset*1 Time and date Page page 22 page 25 page 20 page 20 page 21 page 20 page 21 page 22 page 24 page 8 Base unit settings Changing base unit PIN (Personal Identification Number) The base unit's default PIN is "0000". Important: L If you change the PIN, please write down your new PIN as the unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING BS", then press {>}. {2} {3} 3 4 5 6 7 Press {5}. [. . . ] 250 mW Voice coding: ADPCM 32 kbit/s Power source: AC adaptor 220­240 V, 50 Hz Power consumption, Base unit: Standby: Approx. 9. 2 W Operating conditions: 5 °C­40 °C, 20 %­ 80 % relative air humidity (dry) Dimensions, Base unit: Approx. L The illustrations used in these operating instructions may differ slightly from the actual product. Wall mounting 8 cm Hooks Hook Screws Note: L Make sure the screws are securely fastened to the wall. L Use the following wall template to position the screws before drilling. 8 cm Helpline Tel. [. . . ]