User manual PANASONIC KX-TCD440

[. . . ] Operating Instructions Digital Cordless Phone Model No. KX-TCD440E KX-TCD445E Digital Cordless Answering System Model No. This unit is Caller ID compatible. To display the caller's phone number, you must subscribe to Caller ID service. Charge the batteries for about 7 hours before initial use. Please read these Operating Instructions before using the unit and save them for future reference. Table of Contents Preparation Accessory information . 01289 8333 Preparation Preparation Accessory information Thank you for purchasing a new Panasonic digital cordless phone. Sales and Support Information Customer Care Centre L For UK customers: 08700 100 076 L For Republic of Ireland customers: 01289 8333 L Visit our website for product information: www. panasonic. co. uk L E-mail: customer. care@panasonic. co. uk Direct Sales at Panasonic UK L Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday - Friday, 9:00 am - 5:30 pm. [. . . ] If you forget your PIN, consult your nearest Panasonic service centre. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING BS", then press {>}. {2} {3} {5} {6} Base unit ringer volume page 22 (Medium) Pause length (3 seconds) Change base unit PIN ("0000") Call restriction Emergency number ("112" and "999") page 22 page 22 page 23 page 23 page 31 page 9 3 4 5 6 7 Press {5}. Press {ih}. Adjusting ringer volume 4 levels (high to off) are available. {7} {*} Cancel a handset*1 Time and date *1 If you cancel a handset, the base unit will "forget" the handset registration. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING BS", then press {>}. 3 Press {2} 2 times. 4 Select the desired setting by pressing {1} for low, {2} for medium, {3} for high or {0} for off. 5 Press {>}, then press {ih}. 2 Press {v} repeatedly to display "SETTING BS", then press {>}. 3 Press {3}. 22 Helpline Tel. 01289 8333 Useful Telephone Settings 4 Enter "0000" (default base unit PIN). L If you changed PIN, enter it (page 22). L To select a different memory location, press {>} repeatedly and enter a number. 5 Press {3}. 6 Select the desired setting by pressing {1} for 3 seconds or {2} for 5 seconds. 8 Press {>}. 9 Press {ih}. Turning on/off call restriction 7 Press {>}, then press {ih}. Setting call restriction You can restrict selected handsets from dialling certain phone numbers. You can assign up to 10 phone numbers (memory locations 1­10) to be restricted per handset. If a restricted number is dialled, the call will not be connected and the restricted number will flash on the display. For example, storing an area code will prevent a handset from dialling a long distance call. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING BS", then press {>}. 3 Press {6}. 4 Enter "0000" (default base unit PIN). L If you changed PIN, enter it (page 22). Flashing numbers indicate call restriction is on; non-flashing numbers indicate call restriction is off. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING BS", then press {>}. 5 Press the desired handset numbers to turn on/off. 3 Press {6}. 4 Enter "0000" (default base unit PIN). L If you changed PIN, enter it (page 22). L Flashing numbers indicate call restriction is turned on for the corresponding handset. 6 Press {>}, then press {ih}. Cancelling a restricted number 1 Press {j}. 2 Press {v} repeatedly to display "SETTING BS", then press {>}. 3 Press {6}. 4 Enter "0000" (default base unit PIN). L If you changed PIN, enter it (page 22). 5 Press the desired handset numbers. L The selected handset numbers will flash. [. . . ] 01289 8333 35 Useful Information Technical information Standard: DECT (Digital Enhanced Cordless Telecommunications), GAP (Generic Access Profile) Number of channels: 120 Duplex Channels Frequency range: 1. 88 GHz to 1. 9 GHz Duplex procedure: TDMA (Time Division Multiple Access) Channel spacing: 1728 kHz Bit rate: 1152 kbit/s Modulation: GFSK (Gaussian Frequency Shift Keying) RF Transmission Power: Approx. 250 mW Voice coding: ADPCM 32 kbit/s Power source: AC adaptor 220­240 V, 50 Hz Power consumption, Base unit: Standby: Approx. 9. 2 W Operating conditions: 5 °C­40 °C, 20 %­ 80 % relative air humidity (dry) Dimensions, Base unit: Approx. L The illustrations used in these operating instructions may differ slightly from the actual product. 36 Helpline Tel. [. . . ]