User manual PANASONIC KX-TCD725

[. . . ] KX-TCD725EM-0\(1) 01. 7. 19 10:25 PM Page 1 Digital Cordless Answering System Model No. KX-TCD725EM Operating Instructions DIG ITA L Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the batteries for about 15 hours before initial use. KX-TCD725EM-1(02~23) 01. 7. 19 10:24 PM Page 2 Dear purchaser, You have acquired a KX-TCD725EM, which is a product made in regard with the European Standards for Cordless Telephones (DECT). DECT technology is characterised by high-security protection against interceptions as well as high-quality digital transmission. For example, this telephone can be used within a network of base units and handsets, constituting a telephone system which: operates up to 6 handsets at one base unit allows an intercom between 2 handsets allows the operation of a handset at up to 4 base units, expanding the communication radio area. This telephone may be used for: operating several handsets operating at several base units connecting the base unit to a PBX. Important Information Do not connect the AC adaptor to any AC outlet other than the standard AC 220240 V, 50 Hz. [. . . ] Each time you press or , the display backlight colour will change from green, orange to red on the handset. "Setting Handset", then press Press or Chapter 3 until the arrow points to . "Display Option", then press Press or 6 Press . until the arrow points to . "Backlight Color", then press The current setting is at the arrow. A beep sounds. You can exit the programming mode any time by pressing . 49 Programmable Function on the Handset KX-TCD725EM-3(38~64) 01. 7. 19 10:42 PM Page 50 Call Option Call Prohibition You can prohibit anyone from making a call with your handset except for emergency calls (999, 112). 12), and the unit is in the standby mode. To set the call prohibition mode ON/OFF 1 2 3 4 Press Press . or until the arrow points to . 5 6 Enter the 4-digit handset PIN (p. Press or to select "ON" or . "Setting Handset", then press Press or until the arrow points to . "OFF", then press "Call Option", then press While "Call Bar" is at the arrow, press . Enter H/set PIN 1 2 3 4 5 6 7 8 9 0 0 : ---- A beep sounds and " " is displayed if ON is selected. After returning to the standby mode, " " will go out if OFF is selected. You can exit the programming mode any time by pressing . 50 KX-TCD725EM-3(38~64) 01. 7. 19 10:42 PM Page 51 Direct Call You can easily make a call using a stored direct call number by pressing or . After storing the direct call number, the unit will automatically switch to the direct call mode. When the direct call mode is on, you can ONLY dial the number stored in the direct call memory. 12), and the unit is in the standby mode. To set the direct call number 1 2 3 4 Press . To set the direct call mode ON/OFF 1 2 Follow steps 1 to 3 on To set the direct call number. Press or until the arrow points . Press or until the arrow points to . "Setting Handset", then press Press or until the arrow points to . "Call Option", then press Press or until the arrow points to . "Direct Call No. ", then press "E n t e r P h o n e No " is displayed. Chapter 3 to "Direct ON/OFF", then press 3 Press or to select "ON" or 5 Enter the phone number up to 24 digits. " " will be shown at the top right corner on the standby mode display when set to ON. When set to off , " " will go out. Programmable Function on the Handset 6 7 8 Press . . While "Save" is at the arrow, press Press or to select "ON" or . " " will be shown at the top right corner on the standby mode display when set to ON. To dial the stored number Make sure that " " is displayed, then press or . The number stored in the direct call memory is automatically dialled. 51 KX-TCD725EM-3(38~64) 01. 7. 19 10:42 PM Page 52 Other Option In "Other Option" menu, Changing the 4-digit handset PIN (p. 16) are also available. Selecting the Battery Type Two Nickel Metal-hydride (Ni-MH) batteries are included with this unit. If you replace the batteries with Ni-Cd batteries, you must set the battery type selection to "Ni-Cd", or the battery strength will not be displayed correctly. [. . . ] Advantages of DECT Excellent voice quality: Through sampling of digital signals DECT units obtain nearly noiseless transmission. High grade taping security: Based on digital transmission, DECT conversations are well protected against unapproved monitoring. Multi-Handset operation: To operate several handsets at the base unit, no cable installation is required. Interlink: Intercom conversation can be held free of charge between the registered handsets. [. . . ]