User manual PANASONIC KX-TS105

[. . . ] Integrated Telephone System Preparation Operating Instructions Model No. KX-TS105B KX-TS105W Pulse-or-tone dialing capability Basic Operation Advanced Operation KX-TS105W Useful Information PLEASE READ BEFORE USE AND SAVE. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 27 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic integrated telephone. For your future reference Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer Accessories (included) For extra orders, call 1-800-332-5368. PQKL10038Y3 (Black) PQKL10038Y1 (White) one one 2 Contents Preparation Location of Controls . [. . . ] Once you locked the dialing buttons, even emergency numbers cannot be dialed. Only incoming calls are accepted until the dial lock is canceled. Before using this feature, we recommend storing an emergency number in the memory of the EMERGENCY button (p. (EMERGENCY) Even if the dialing buttons are locked, the number stored in the button can be dialed. If you choose not to program emergency numbers, but plan to use the dial lock, any number programmed into the EMERGENCY button can be accessed. To set the dial lock M IC 1 2 3 Press (DIAL\LOCK). The MUTE indicator flashes. Enter the PIN code (p. The unit will return to the standby mode. You can use the following features while the dialing buttons are locked. Dialing a number you programmed into the memory of the EMERGENCY button (p. 17) To cancel the dial lock Follow steps 1 through 3 above again. 20 Call Restriction You can prevent the unit from dialing phone numbers beginning with specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted leading digits cannot be dialed out. To set the call restriction Make sure that a call is not put on hold. (PROGRAM) 1 2 3 4 5 6 7 Press (PROGRAM). The MUTE indicator flashes. Press (MUTE). Press (1). If you use "1111" as a PIN code (factory set), there is no need to enter a PIN code. 19). (MUTE) and Indicator Press (PROGRAM). If a wrong PIN code is entered, 3 beeps will sound. Enter a correct PIN code and press (PROGRAM). Advanced Operation Enter the number(s) (1 digit or 2 digits) you want to restrict ((0) to (9)). If you enter a wrong number, enter a correct number. To change restricted digits from 2 digits to 1 digit, press ($) and enter 1 digit. Press (PROGRAM). The unit will return to the standby mode. If your unit is connected to a PBX, this function may not operate. Contact your PBX supplier for more information. To cancel the call restriction Follow steps 1 through 5. In step 6, press ($) to cancel call restriction and press (PROGRAM). A long beep will sound and the unit will return to the standby mode. For assistance, please call: 1-800-211-PANA(7262) 21 Optional Headset Plugging an optional headset into the unit allows a hands-free phone conversation. To order, call the accessories telephone number on page 2. Connecting an Optional Headset to the Unit Connect an optional headset to the headset jack as shown below. The illustration headset is a KX-TCA90. Headset Jack Hook Microphone Earpiece If you want to have a normal conversation, disconnect the headset. 22 Making/Answering Calls Make sure to install the batteries. VOLUME (_), (^) (SP-PHONE/HEADSET) and Indicator 1 2 Press (SP-PHONE/HEADSET) to make or answer a call. The SP-PHONE/HEADSET indicator flashes. If you misdial when making a call, press (SP-PHONE/HEADSET) twice and dial again. To hang up, press (SP-PHONE/HEADSET). The indicator light goes out. To adjust the headset receiver volume (4 levels): While using the headset, press VOLUME (_) or (^). During a conversation using the headset, you cannot switch the call to the handset by lifting it off the cradle. If you disconnect the optional headset during a conversation with the handset on the cradle, the call will be switched to the speakerphone. During a conversation using the speakerphone, you can switch the call to the headset by connecting the headset. For assistance, please call: 1-800-211-PANA(7262) 23 Useful Information Battery Replacement If the speakerphone does not work, it may be the time to replace the batteries. Replace the batteries within 1 minute to keep the programmed settings. + + + - 1 2 1 Disconnect the telephone line cord from the unit. 2 Press down in the direction of the arrow and remove the cover. 3 4 Replace the batteries with new ones using correct polarity (i, j), and close the cover. Connect the telephone line cord to the unit. Battery Precautions: The batteries should be used correctly, otherwise the unit may be damaged by battery leakage. --Do not charge, short-circuit, disassemble, heat or dispose of in fire. [. . . ] If such changes can be reasonably expected to render any customer terminal equipment incompatible with telephone company communications facilities, or require modification or alteration of such terminal equipment, or otherwise materially affect its use or performance, the customer shall be given adequate notice in writing, to allow the customer an opportunity to maintain uninterrupted service. When programming emergency numbers and/or making test calls to emergency numbers: 1. Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up. Perform such activities in the off-peak hours, such as early morning hours or late evenings. For assistance, please call: 1-800-211-PANA(7262) 29 Useful Information " FCC and Other Information This device complies with Part 15 of the FCC Rules. [. . . ]