User manual PANASONIC NV-VP30

[. . . ] DVD/CD Player / Video Cassette Recorder NV-VP30EB/EBL (Model suffix: 'EB' for UK model, 'EBL' for Ireland model) Operating Instructions DVD / CD PLAYER /I OPEN / CLOSE VCR EJECT DVD DVD -RAM VIDEO PLAYBACK TIMER CHECK PULL-OPEN REC CHECK QUICK ERASE PROG PLAY MUSIC WITH PICTURE NV-VP30 PAL Before attempting to connect, operate or adjust this product, please read these instructions completely. Contents Precautions / Shop@Panasonic 2 Precautions 3 Caution 4 Check List 5 CAUTION 6 Remote control codes 7 Inserting batteries Front Panel / Sockets 8-9 Remote control functions 10-11 Connections 12-13 without Scart cable 12 with Scart cables 13 External units 14 DVD Connections 15 VCR AUTO SETUP 16-17 Checking the Settings for Auto Setup 18 Removing Interference / 19 Changing RF-channel Playback 20 Tracking control 21 Recording 22 External recording control 23 Timer recording 24-26 INTELLIGENT TIMER 27 VIDEO Plus+ 28-29 Manual setup 30-32 Menu Overview 30 Manual Tuning 30 Changing the name of TV stations 31 Changing the order of TV stations or deleting a station Restart Auto Setup 32 Shipping condition / restoring factory defaults Others Menu 33 Owner ID 34 Clock setting 35 TV control 36 AUDIO out settings 37 NICAM sound system 37 Advanced functions 38-39 Page Dear customer DVD QUICK SETUP 40 SETUP-menu 41-45 Disc 41 Ratings 42 Video 43 Audio 44 Display / Others 45 General playback 46-50 Playback 46 Slow Motion Search function Skipping chapters, tracks or pictures Scene replay 47 Random playback Resume function POSITION MEMORY 48 Chapter review Frame-by-frame REPEAT 49 ZOOM function 50 Synchronous recording 50 MUSIC with PICTURE 50 Programme play 51 JPEG 52 MP3 / WMA Menu 53 DVD-RAM Menu 53 HighMAT 54 On-screen displays 55-57 Before requesting service 58-60 Informations 61 Tape Care 62 Specifications 63 Index Last page Language codes Last page Thank you for trusting and purchasing this high-quality product. Panasonic is one of the leading companies of the consumer electronics industry. We are sure that this appliance will meet with all your expectations. Precautions Voltage: Only use power sources complying with the specifications (220-240 VAC, 50/60 Hz). Check the source carefully when setting up the unit on a ship or other place where DC is used. AC mains lead protection: Ensure the AC mains lead is connected correctly and not damaged. [. . . ] Press and hold remote control unit buttons ENTER and 1 or 2 to set the frequency channel of the relevant unit. 1 : The VCR recording start and stop time is controlled by a control signal sent via the 21-pin cable from the external unit, for example Sky Digibox. : The VCR will start recording when AV2 input detects the video signal and stop recording when the video signal is switched off by the external unit. Remote EXT LINK 2 33 Owner ID Tuning Manual Auto Setup Shipping condition Owner ID VCR TV DVD To change the Owner ID !! Owner ID PIN number Name House No Postcode : 846* : ************** : *********** : *********** !- After entering the correct PIN number, you can change the Name, House No and Postcode. Use , the Numeric buttons and ENTER to select and change the desired information. Press EXIT to exit the On Screen Display. Owner ID Name House No Postcode : MARWIN : BANKS : RG12 8FT VCR To display the Owner ID information ! Keep EJECT pressed for more than 5 seconds. - After 30 seconds, this menu automatically disappears. Notes: 34 VCR DVD Clock setting On Screen Display. VCR TV DVD The clock will normally be set correctly during Auto-Setup however, in some circumstances the VCR cannot set the clock automatically. In this case, follow the operation steps below to manually set the clock. To manually adjust the clock !Press EXIT to exit the On Screen Display. Menu Timer recording Tuning Clock set Others EXIT :select : exit ENTER : access Clock / Zeit Datumset MANUAL To activate the automatic time correction function The correct time for the VCR clock can be automatically maintained when the VCR is tuned to a station that transmits a time signal. !03 Clock / Zeit Datumset AUTO Time Date : 12 : 00 : 00 : 11. Under adverse reception conditions, etc. , the Automatic time correction function may not work. In this case, the indication for Clock setting is automatically reset to MANUAL. If the reception conditions improve later on, it may be possible to activate this function. Press EXIT to exit the On Screen Display. MANUAL, otherwise, the automatic time correction function is deactivated. In case of a power failure, an automatic back-up system maintains the clock for approximate 60 minutes. When Clock setting is set to AUTO, the automatic time correction function checks and if necessary adjusts the time several times every day. The automatic time correction function only works when the VCR is in standby, it does not work in the timer recording mode. Notes: - If Clock setting is set to AUTO when you open the Clock screen, do not set it to - 35 TV control Setting the Remote Control to operate your TV ! Set the VCR/TV/DVD switch to TV. VCR TV DVD Only Panasonic TVs can be operated with the provided remote control. The settings for operating the TV with the remote control have already been made. However, some of old Panasonic TVs cannot be operated using this remote control. TV Press to switch the TV from on to standby mode or vice TV-Standby/on versa. In standby mode, the unit is still consuming a small amount of power. 3 6 9 10 1 4 7 2 5 8 0 Numeric (0-9) To select desired programme position. INPUT SELECT AV TRACKING/V-LOCK AV CH To select desired AV input on the TV. Channel selector CH VOLUME VOLUME TV ASPECT To adjust the volume of the TV. [. . . ] The audio tracks of many DVDs contain audio material in up to 8 languages. This product features a copyright protection implement whose technology is protected by US patents and intellectual property rights owned by Macrovision Corporation and other copyright proprietors. The use of this copyright protection implement is subject to permission of Macrovision Corporation and is restricted to purely private use only. It is prohibited to examine this appliance for the purpose of unlicensed construction. [. . . ]