User manual PANASONIC PT-AE900U

[. . . ] R LCD Projector Operating Instructions Model No. PT-AE900U Before operating this product, please read the instructions carefully and save this manual for future use. For assistance, please call : 1-888-View-PTV(843-9788) or send e-mail to : consumerproducts@panasonic. com or visit us at www. panasonic. com (U. S. A) For assistance, please call : 787-750-4300 or visit us at www. panasonic. co. jp/global/ (Puerto Rico) TQBJ 0182 ENGLISH Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-AE900U Serial number: CAUTION: This equipment is equipped with a threepin grounding-type power plug. [. . . ] BPress the F or G button to select the setting you want to retrieve, then press the ENTER button. NOTE: B Only the settings saved in the "MEMORY SAVE" menu will be displayed in the "MEMORY LOAD" menu. (Refer to page 47. ) Turning off the picture momentarily (SHUTTER) The "SHUTTER" function can be used to momentarily turn off the picture when the projector is not being used for short periods of time. The projector uses less power in "SHUTTER" mode than it does in normal projection mode. B To return to normal operating mode, press any button on either the projector or remote control unit except the LIGHT button and the buttons to operate the selected device on the remote control unit. (Refer to page 17 for details. ) Displaying the "ADVANCED MENU" (ADVANCED) Press the ADVANCED button. BThe individual adjustment screen will be displayed as shown above. BYou can adjust "ADVANCED MENU" items with the bar scale only. BThe screen display will be cleared when the MENU button or the RETURN button is pressed, or when no operation is carried out for 3 seconds. BRefer to page 46 for details on the "ADVANCED MENU". 34-ENGLISH ENGLISH-35 Useful functions BThe individual adjustment screen will be displayed as shown above. BYou can adjust "PICTURE" menu items using selective settings or the bar scale only. BThe screen display will be cleared when the MENU button or the RETURN button is pressed, or when no operation is carried out for 3 seconds. BRefer to page 44 for details on the "PICTURE" menu. Using the Cinema Color Management function(C. C. M) You can adjust, save, and retrieve the settings for the selected colors of the projected image based on the selected picture mode to suit your preference. Press the F or G button to select an item, press the I or H button to change the settings, and press the ENTER button for confirmation. Press the C. C. M button. CURSOR You can select a color in the projected image, and adjust the color settings. B Press the F, G, I and H buttons to move the cursor, and then press the ENTER button. B The selected color (C) and the "CURSOR" menu (A) will be displayed. B The color adjusted in the "CURSOR" menu (D) will be displayed. B The letters PROCESSING and the progress status bar will be displayed while the adjusted color is applied. B The adjusted color settings will be saved in the "LOG" menu. If you would like to continue to adjust another color after adjusting a color, press the MENU button or the RETURN button on the remote control unit, and then repeat the steps from step #. B The "COLOR MANAGEMENT" menu will be displayed. PROFILE B Retrieves the saved profile (color settings which have been adjusted). A NORMAL When projecting images according to the setting of "PICTURE MODE" (page 33). USER1/2/3 These items are displayed only when "PROFILE SAVE" has been carried out. NOTE: B Refer to page 65 for the general arrangement of the "COLOR MANAGEMENT" menu. [. . . ] A Signals are converted by the image processing circuit before picture is projected. Screen If "OK" is selected, the screen display will return to "LOG" when any "POINT" is remaining. When all of the "POINT" items are deleted, the screen display will return to "COLOR MANAGEMENT". 64-ENGLISH ENGLISH-65 Others Using the SERIAL connector The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector. Control commands Command Control contents Remarks In standby mode, all commands other than the PON command are ignored. B If a PON command is received while the cooling fan is operating after the lamp has switched off, the lamp is not turned back on again straight away, in order to protect the lamp. Parameter VID=VIDEO SVD=S-VIDEO RG1=PC YUV=YPBPR1 HDM=HDMI CP1=YPBPR1 CP2=YPBPR2 Use this command to momentarily turn off the picture. [. . . ]