User manual PANASONIC RX-ED77

[. . . ] Please note them in the space provided below and keep for future reference. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. REFER SERVICING TO QUALIFIED PERSONNEL. Before use CAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Supplied Accessories Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. [. . . ] ·Before using chemically treated cloth, read the instructions that came with the cloth carefully. PHONES For a cleaner crisper sound Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included). RQT5671 Before use Press [CLOCK/TIMER] to select "CLOCK". 9 CDs Press [POWER, ] to turn the unit on. 9 Press [9 TAPE/CD] to switch to CD mode. Each time the button is pressed TAPE CD Press [/ CD] to open the tray, load a CD, and / press [/ CD] to close the tray. B; Plays to the end of the CD and stops. # Turn [­ "VOLUME#+] to adjust the volume. Listening To stop play Press [ PLAY RE FADER SLEEP EQ ON TAPE/CD]. 1 PGM REC ALL 1-REC ST MONO RANDOM Displayed when CD not loaded One touch play (When using AC power) When a CD is loaded, press [ CD]. Press again to resume play. Label To skip tracks Press [REW/­/ ] (backward) or [ /+/FF] (forward). Searching through tracks PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM Press and hold [REW/­/ (forward) during play. ] (backward) or [ /+/FF] Number of tracks Total playing time If this unit causes interference to other equipment (radios and televisions) separate it from the equipment. PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM CD selection Choose CDs with this mark: ( ) This unit can play CD-DA format audio CD-R and CD-RW that have been finalized upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording. Finalizing is a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW. Track Playing Elapsed time PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM Do not ·use irregularly shaped CDs ( ). ·use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. ( ) ·attach scratch-proof covers or any other kind of accessory. (Wipe with a soft, dry cloth. ) ·use CDs printed with label printers available on the market. 10 RQT5671 CDs Y Other modes of play Preparation: Press [ ] to switch to CD mode. Remote control only Direct access play Starts normal play from a selected track Select the track with the numbered buttons. For tracks numbered 10 and over, press [ 10] then the two digits. Repeat play Plays a track or all tracks repeatedly Press [CD PLAY MODE] before or during play to select the mode. Each time the button is pressed : One track repeated : All tracks repeated PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM No display (cancelled) Press [CD] to start play if in the stop mode. To repeat selected tracks PLAY RE FADER SLEEP Start program play ( page 12). Press [CD PLAY MODE] to select " EQ ON ". 1PGM REC ALL 1-REC ST MONO RANDOM To cancel Press [CD PLAY MODE] until " " and " " are cleared. Using preset scan You can search for a station by listening to all preset channels for 8 seconds each. Main unit only Preparation: Press [TUNE MODE] to display " PLAY RE FADER SLEEP EQ ON ". 1 PGM REC ALL 1-REC ST MONO RANDOM 1 Press and hold [REW/­/ ] or s until "PS" appears on the display. [ Preset scan starts. /+/FF] Preset channel 2 find the desired ] or [ s Press [REW/­/ channel. PLAY RE FADER SLEEP EQ ON /+/FF] when you 1 PGM REC ALL 1-REC ST MONO RANDOM Preset scan ends after searching through each preset channel once. To stop during the process, press [REW/­/ ] or [ / +/FF] Cancelling a preset channel PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM e. g. With 10 seconds Press [REW/­/ ] or [ /+/FF] so "-- --" is displayed. Now when [REW/­/ ] or [ /+/FF] is pressed, channel 3 is skipped. PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM 14 RQT5671 The channel can still be selected with the remote control. Cassettes Press [POWER, ] to turn the unit on. Insert a cassette into the deck. Play starts from the side facing up. Press [3 TAPE] to start play. # To stop play Press [7 TAPE/CD]. To eject tape Stop tape play, then press [0 TAPE]. One touch play (When using AC power) When a cassette is loaded, press [3 TAPE]. Fast-forward and rewind Press [REW/­/ ] (rewind) or [ /+/FF] (fast-forward). Selection of tapes Use normal position tapes to play correctly. High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes. PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM Tape Counter Tape Playing Cassette tape care · Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. · Tape slack can get caught up in the mechanism and should be taken up before the tape is played. · Endless tapes can get caught up in the deck's moving parts if used incorrectly. PLAY RE FADER SLEEP EQ ON 1 PGM REC ALL 1-REC ST MONO RANDOM Before Recording Use household AC power or new batteries when recording, to avoid poor recording caused by the batteries running down. Television can cause interference to recording made on this unit if the two are too close to each others. Selection of tapes for recording Present state (e. g. , elapsed play time of CD) Use normal position tapes. [. . . ] IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Also, the purchaser will be responsible for shipping the unit to the above address. If you have a problem with this product that is not handled to your satisfaction, then write to the Consumer Affairs Department at the Company address indicated above. For Product Information, Operating Assistance, Literature Request, Dealer Locations, and all Customer Service inquiries please contact: 1-800-211-PANA(7262), Monday - Friday 9 am - 9 pm, Saturday - Sunday 9 am - 7 pm, EST. Web Site: http://www. panasonic. com You can purchase parts, accessories or locate your nearest servicenter by visiting our Web Site. [. . . ]