User manual PANASONIC RX-ES25
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC RX-ES25. We hope that this PANASONIC RX-ES25 user guide will be useful to you.
You may also download the following manuals related to this product:
PANASONIC RX-ES25 (3243 ko)
PANASONIC RX-ES25 (3243 ko)
PANASONIC RX-ES25 (11740 ko)
PANASONIC RX-ES25 (11740 ko)
PANASONIC RX-ES25 (11740 ko)
Manual abstract: user guide PANASONIC RX-ES25
Detailed instructions for use are in the User's Guide.
[. . . ] Portable Stereo CD System
Operating Instructions
Model No.
RX-ES25 RX-ES20
Note: The "EB" indication shown on the packing case indicates United Kingdom. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.
EB GN
RQT5189-1B
Dear Customer Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.
Precautions
· ·
Avoid using or placing this unit near sources of heat. [. . . ] B
Using auto scan
Remote control only You can search for a station by listening to all tuned-in stations for 8 seconds each.
1 s Press [TUNER] to select "FM" or "AM". To stop during the process, press [AUTO SCAN].
C
If noise is excessive in FM
Remote control only
Press [FM MODE/BP] to display "
Monaural sound is selected (" reception is weak.
MONO
".
" goes off) and noise reduces when
Press [FM MODE/BP] again to cancel the mode.
Auto-tuning
Press and hold [REW / / Q] or [R / + / FF] until the frequency starts changing rapidly. Start auto-tuning again if this occurs. ) To stop auto-tuning Press [REW / / Q] or [R / + / FF]. D s To improve reception FM: Change the length and direction of the antenna. Note · AM reception is briefly interrupted if [0 DECK] is pressed. · To improve reception when using the unit in a building or vehicle, use it near a window.
A
212 7 7·7
The Radio
(when using batteries) Press [
/I ].
Preset tuning
Tuning is simpler if you preset stations. You can preset 12 FM and 12 AM stations.
A
SLEEP TIMER FADER DISPLAY
Presetting radio stations
B 7
Preset channel
C 7 1 7 2 7
PRESET EQ
TAPE
TUNER
CD
TUNER
S. VIRTUALIZER REW FF
AUTO SCAN
PRESET TUNE CD SKIP
VOLUME
+
12 7·7
Indicates preset scan
PRESET TUNE CD SKIP
PRESET TUNE CD SKIP
1 7 2 7
2 7
1 4 7
2 5 8
3 6 9
PGM/-CLEAR
10 0
1 7
Preparation: Tune to the station you want to preset. 2 s Turn [TIME/PRESET TUNE
*
While "
" is flashing
On the remote control Press the numbered button(s) to enter the station into a channel (1 to 12). 1
Selecting channels
Preparation: Press [TUNER BAND] to select "FM" or "AM". B s
Turn [TIME/PRESET TUNE the channel.
CD SKIP
] to select
On the remote control Press the numbered button(s) to select the channel (1 to 12). To select channel 10, 11 or 12, press [10], then the two digits.
C
Using preset scan
You can search for a station by listening to all preset channels for 8 seconds each. Remote control only Preparation: Press [TUNER] to select "FM" or "AM".
1 Press and the [ S / s appears onholddisplay. 4 ] or [ 3 / T ] until "PS"
Preset scan starts.
2 Press channel. s desired[ S / 4 ] or [ 3 / T ] when you find the
Preset scan ends after searching through each preset channel once. While " " is flashing Turn [TIME/PRESET TUNE CD SKIP ] to display " ". Now, when you perform preset scan or turn [TIME/PRESET TUNE CD SKIP ] to select a preset channel, channel 3 is skipped. Hints · To select the cancelled channel, press the remote control's numbered buttons. · You can press [S / 4] or [3 / T ] on the remote control for 3 turning of [TIME/PRESET TUNE CD SKIP ] described above.
RQT5189
Listening
CD SKIP ] to select a channel and press [·MEMORY*CLEAR].
9
TAPE / CD
2 7
CDs
1 s Press [0 CD] to open the tray.
(The unit comes on. ) Load a CD and press [0 CD] to close the tray.
2 s Press [6 CD] to start play. 3 s Press [ +, VOLUME] to adjust the volume.
Plays to the end of the CD and stops.
To stop play
Listening
3 7
1 7
Press [n TAPE/CD].
One touch play (When using AC power) When a CD is loaded, press [6 CD]. Press again to resume play.
1 7
To skip tracks
Turn [TIME/PRESET TUNE CD SKIP ] clockwise (forward) or counter-clockwise (backward). 3
2
CD
Elapsed time of track in play Track number in play
VOLUME
A 7
a b c
10
RQT5189
3 7
7
Label
Searching through tracks
Press and hold [REW / / Q] (backward) or [R / + / FF] (forward) during play. On the remote control Press and hold [S / 4] (backward) or [3 / T ] (forward) during 3 play.
Note
Separate this unit from radios and televisions if it causes interference.
A
CD selection
Choose CDs with this mark: (a)
Do not
· use irregularly shaped CDs (b). · use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. [. . . ] The record timer comes on about 30 seconds earlier than the set time.
To cancel the timer
Press [oePLAY/REC] when the unit is on to clear the timer indicaoe tors from the display. (The timer comes on at the set time everyday if the timer is on. )
To check the settings (when unit is off)
Press [CLOCK/TIMER]. The settings are shown in the following order: Start time, Finish time Music source Volume
Original display
To change the settings (when unit is on)
To change the times Do steps s, s , s , and s . Note The play and record timers cannot be used together.
A 7
SLEEP
1 4 7
SLEEP TIMER FADER DISPLAY
A
The Sleep Timer
Remote control only You can set the unit to turn off after certain time. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC RX-ES25
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC RX-ES25 will begin.