User manual PANASONIC SA-PM15

[. . . ] Listening caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Front panel controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For channels 10 to 15, press [ 10], then the two digits. 1 1 1 4 7 2 5 8 0 3 6 9 10 1 Press [PLAY MODE] to select "PRESET". 2 Press [g 4/REW] or [f 3 /FF] to OR Preset channel 2 select the channel. Adjust the volume. 2 VOL VOL RQT6683 Listening operations Do the following once each for FM and AM. Preparation: Tune to the frequency where pre-setting is to begin (\ page 10). 11 CDs This unit can play CD-DA (digital audio) format audio CD-R and CD-RW that have been finalized (a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW) upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording. You can simply listen to the CD on a single tray, or you can select and listen to the CD in a particular tray. See the section on All-Disc play (\ page 14) for information on how to listen to all the CDs one after the next. STOP , DEMO /FF, /REW (CD 1) ~ (CD 5) 2 3 1 Listening to the CD on a single tray 1 Listening operations 1 OPEN/CLOSE Press [c OPEN/CLOSE] to open the disc tray and insert the CD. The unit comes on automatically and tray 1 opens. Press [c OPEN/CLOSE] again to close the tray. 2 3 Press [CD 2/J] to start play. The selected CD is played from the first track to the last track in order. After the last track, the player stops automatically. Adjust the volume. Label must face upward. Disc tray 2 CD indicator CD To stop the disc Press [STOP L, ­DEMO]. Searching through tracks During play or pause Press and hold [ g 4/REW] (backward) or [f 3 /FF] (forward). CD indicator The CD indicator on the display lights whenever the tray is in the playing position whether it is loaded or not. Press and hold [PLAY MODE] and make sure "REPEAT ON" and " " are displayed. To use repeat play with CD Play Mode function Set the desired mode (A page 14), press and hold [PLAY MODE] before or during playback, and make sure "REPEAT ON" and " " are displayed. A PLAY MODE B CD display By remote control only This function allows you to display the remaining play time of the current track. B DISPLAY During play or pause mode Press [DISPLAY]. Every time you press the button: Remaining play time Elapsed play time Remaining play time Note When track number 25 or greater is playing, remaining play time display shows "­ ­:­ ­ ". RQT6683 Listening operations 1 DISC 15 CLOCK SLEEP AUTO OFF TIMER UTO PLAY REC CDs 3 2 1 DISC 1 4 7 PLAY MODE Y PGM 2 5 8 0 3 6 9 10 4 5 17 /REW, /FF Program play By remote control only This function allows you to program up to 24 tracks. CD TUNER/ BAND CLEAR TAPE AUX VOL MUTING S. SOUND EQ PRESET EQ REW DISPLAY VOL FF DIMMER 1 2 3 4 5 6 Press [CD 2/ J] and then [L CLEAR]. Press [DISC]. (within 10 seconds or so) 1 Listening operations CLEAR CD 2 3 4 PGM 7 Press [1] ­ [5] to select the disc you want. Press the numeric button(s) to select the track you want to play in the desired sequence. Repeat steps 3 through 5 until you have programmed all the tracks you want. Press [CD 2/ J]. Play will start in the programmed sequence. DISC 1 4 2 5 3 To cancel program play mode Press [PGM] in the stop mode. To select a two-digit track Press [ 10] and then the two numbers you want. A When "CD FULL" appears The number of programmed tracks is limited to 24. No further tracks can be programmed. B You can do the following during program mode: 5 1 4 7 2 5 8 0 3 6 9 10 · Check program contents. Memory retention Your program is retained in memory for about 1 week while the system is unplugged. To replay your program If you turned OFF your program with [PGM], you can play it again as explained below. Program order If you program a track not on your CDs The track is initially programmed, but during program play, the player will skip that track and will continue playing from the next programmed item. [. . . ] THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, travel to and from the servicer, loss of media or images, data or other memory content. The items listed are not exclusive, but are for illustration only. ) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. [. . . ]