User manual PANASONIC SA-XR10

[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. [. . . ] The default level is 3. MUSIC Adds surround effects to stereo sources. PANORAMA Sound is spread out more so you feel like you are surrounded by music. 1. Dimension Control ­ DIMEN You can make up for differences in the output level of the front and surround speakers. You can choose a level between ­3 and +3 ­ Increase the level to move sound to the front speakers, decrease to move it to the surround speakers. Press [­/L] or [+/R] to adjust the effect. CINEMA Use this mode when playing movie software. You can adjust the effect of MUSIC with the center image control. Center Image Control ­ C-IMG This adjustment helps you realize a more natural sound image when listening to music. Move sound out into the front speakers to improve the overall front image, or add sound to the center speaker to fix the center image. You can choose a level between 0 (the center speaker is dominant) and 5 (center sound is spread out). The default level is 3. MUSIC Adds surround effects to stereo sources. Notes on using NEO:6 You cannot select the above modes when the "DTS" or "% DIGITAL" indicator is on. 1. Press [­/L] or [+/R] to adjust the effect. You can adjust the sound field by adjusting the level of the speakers and the delay time of the surround speakers. These adjustments can be made for each SFC mode. HALL Imparts the reflection and spread of a large concert hall. CLUB Conveys the exciting and intimate atmosphere of a jazz club. To adjust the speaker level 1. Press [LEVEL] to select the speaker channel. Each time you press the button: C / RS / LS / SW Sound does not come from the surround back speaker. All rights reserved. [2CH MIX, ENHANCED , SURROUND, SFC] 2CH MIX: Appears when you are playing a multichannel source in 2CH MIX mode ENHANCED : Appears when enhanced surround mode is on SURROUND: Appears when you are using Dolby Pro Logic 2, NEO:6 or enhanced surround mode SFC: Appears when you are using an SFC mode RQT6840 Others 17 Control guide Remote control Buttons not explained on this page are used only to operate other equipment. [DVD 2CH/6CH, TV, TUNER/BAND RECEIVER, TAPE, CD, VCR] ( SA-XR45 ) [DVD 2CH/6CH, TV, TUNER/BAND, TAPE, CD, VCR] ( SA-XR10 ) Input mode and remote control mode buttons. These buttons light when you press other buttons to indicate the current remote control mode. ( SA-XR45 ) RECEIVER RECEIVER AV SYSTEM [^, RECEIVER] Standby/on button. DVD TV ^ TUNER/BAND RECEIVER ^ TAPE 2CH / 6CH CD VCR [1, 2, 3, 4, 5, 6, 7, 8, 9, 0] To enter radio frequencies and channels. 1 4 7 DIRECT TUNING DISC SKIP u 2 5 8 0 i 3 CH > [=10, ENTER] To enter two digit channels. 6 VOLUME 9 ENTER [DISC, DIRECT TUNING] To enable selection of radio stations by frequency. > 10 = SLOW / SEARCH t y [1, CH, 2] For selecting preset radio channels. ­ TV VOL + g TOP MENU h q [+, ­, VOLUME] To adjust the volume. MENU [e, r, w, q, ENTER, RETURN] To operate the on screen menus. ( SA-XR45 ) DIRECT NAVIGATOR PLAY LIST ENTER [SUBWOOFER] For selecting subwoofer level. Select SW ­ ­ ­ to stop output. [DIMMER] For dimming the unit's display and turning off the panel light. DISPLAY TV/VIDEO DIMMER SUBWOOFER RETURN MUTING [INPUT MODE] For selecting AUTO, ANALOG or DIGITAL. INPUT MODE -TEST/­SETUP TONE/ BALANCE [MUTING] ­/L +/R To mute the volume. [SLEEP] To start the sleep timer. SLEEP LEVEL EFFECT [-TEST/­SETUP] ( SA-XR45 ) DOLBY STEREO/ 2CH MIX PRO LOGIC NEO:6 SFC To start the speaker test signal or enter the setup menu. [TEST] ( Others [STEREO/2CH MIX] For selecting STEREO or 2CH MIX mode. SA-XR10 ) To start the speaker test signal. [TONE/BALANCE] To adjust the bass, treble and front speaker balance. [DOLBY PRO LOGIC 2] For selecting a Dolby Pro Logic 2 mode: MOVIE, MUSIC or PANORAMA. [LEVEL] Use when adjusting speaker level. [EFFECT] Use when adjusting Dolby Pro Logic 2, NEO:6 or SFC effects. [NEO:6] For selecting a NEO:6 mode: CINEMA or MUSIC. [­/L, +/R] First select SLEEP, EFFECT, LEVEL, TONE or BALANCE, then press [­/L] or [+/R] to adjust. [SFC] For selecting SFC modes. For your reference ¡When DVD 6CH input is on Speaker settings are ineffective. Change the settings on the DVD player if necessary. ¡When using the subwoofer RQT6840 You cannot adjust subwoofer level if DVD 6CH INPUT is selected. Sound can be distorted if you raise the volume while subwoofer level is high. Reduce subwoofer level if this occurs. ¡When muting is on Muting is also canceled when the unit is turned off. 18 The radio FM MODE MEMORY PRESET TUNE 2 TUNE 1 SA-XR45 SA-XR10 TUNER/BAND RECEIVER RECEIVER RECEIVER AV SYSTEM DVD TV TUNER/BAND ^ TUNER/BAND RECEIVER ^ TAPE 2CH / 6CH CD VCR 1 POWER 8 ^ % DIGITAL EX % DIGITAL % PL2 DTS 96/24 DTS-ES DTS NEO:6 FM MODE MEMORY PRESET TUNE 2 TUNE 1 INPUT SELECTOR MULTI-SOURCE ENHANCED DIGITAL RE-MASTER SURROUND BAND DOWN UP PHONES VOLUME 2 5 8 0 3 6 9 ENTER 1 4 7 DIRECT TUNING DISC SKIP u 2 5 8 0 i 3 CH CH 4 7 DIRECT TUNING DISC 6 VOLUME 9 ENTER > 10 = INPUT SELECTOR BAND SLOW / SEARCH t y > 10 = ­ TV VOL + g h q TOP MENU MENU Manual tuning You can tune radio stations manually by selecting the station's frequency. Automatic presetting 1. Press and hold [MEMORY]. The FM stations the unit can receive are preset in channels 1 to 30. 1. Press [TUNE 2 or 1] to select the frequency. Tuning intervals: FM ­ 0. 2 MHz AM ­ 10 kHz 3. [. . . ] 9. 5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985 Panasonic/Technics Audio Products Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as "the warrantor") will, for the length of the period indicated on the chart below, which starts with the date of original purchase ("warranty period"), at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished product. Product or Part Name Audio Products (except items listed below) All Audio Racks (cabinets) Technics Stand Alone Speakers, Subwoofer Speakers USB Reader-Writer, Personal Computer Card Adapters (in exchange for defective item) Accessories: Headphones, Cartridges, Microphones, Adapters Rechargeable Batteries (in exchange for defective item) SD Memory Cards, Rechargeable Battery Packs (in exchange for defective item) Parts One (1) year Thirty (30) days Three (3) years One (1) year Ninety (90) days Ten (10) days Ninety (90) days Labor One (1) year Not Applicable Three (3) years Not Applicable Ninety (90) days Not Applicable Not Applicable Carry-In or Mail-In Service For Carry-In or Mail-In Service in the United States call 1-800-211-PANA (1-800-2117262) or visit Panasonic web site: http://www. panasonic. com For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910. Limited Warranty Limits And Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God. [. . . ]