User manual PANASONIC SC-HTB880EB

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC SC-HTB880EB. We hope that this PANASONIC SC-HTB880EB user guide will be useful to you.


PANASONIC SC-HTB880EB : Download the complete user guide (5759 Ko)

You may also download the following manuals related to this product:

   PANASONIC SCHTB880EB (1615 ko)

Manual abstract: user guide PANASONIC SC-HTB880EB

Detailed instructions for use are in the User's Guide.

[. . . ] This appliance is supplied with a moulded three pin mains plug for your safety and convenience. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. [. . . ] Press [OK] to exit. ≥ Select “OFF ADJUST” to turn the automatic clock adjustment function off. To verify or improve the signal reception quality To check the signal reception quality, at least 1 frequency block needs to be successfully memorised. ≥ If “SCAN FAILED” is displayed after “DAB/DAB+” is selected or after an auto scan, proceed to “Manually tuning 1 frequency block” (l below) ≥ If stations have already been memorised to this unit, proceed to “Checking the DAB/DAB+ signal reception quality” (l right) ≥ If the antenna has been adjusted, perform auto scanning and update the station memory. (l 10) ∫ Manually tuning 1 frequency block Use this function to scan 1 frequency block after adjusting the position of the DAB antenna. Preparation Note down a frequency block that can be received in your region (e. g. , 12B 225. 648 MHz). 1 2 3 While “SCAN FAILED” is displayed. Press [3, 4] to select the frequency block that is receivable in your region and then press [OK]. 11 RQT9941 SC-HTB880EB~RQT9941-B. book 12 ページ 2014年1月21日 火曜日 午後2時52分 Listening to FM radio You can preset up to 30 channels. ≥ Press [RADIO/AUX] repeatedly to select “FM”. ∫ Manual tuning and presetting Select a radio broadcast. 1 2 3 Press [PLAY MENU] repeatedly to select “TUNEMODE”. Press [:/6] or [5/9] to tune to the required station. ≥ To start automatic tuning, press and hold [:/6] or [5/9] until the frequency starts scrolling. Tuning stops when a station is found. ≥ A station previously stored is overwritten when another station is stored in the same channel preset. Presetting stations automatically To preset the channel 4 While listening to the radio broadcast, press [OK]. 5 Press [3, 4] to select the channel and then press [OK]. 1 2 Press [PLAY MENU] to select “A. PRESET”. Press [3, 4] to select “LOWEST” or “CURRENT” and then press [OK]. The tuner starts to preset all the stations it can receive into the channels in ascending order. ∫ To improve FM sound quality 1 2 While receiving FM broadcasts, press [PLAY MENU] repeatedly to select “FM MODE”. (During standby, press [DISPLAY] once. ) ≥ The clock is reset when there is a power failure or when the AC mains lead is removed. ≥ Reset the clock regularly to maintain accuracy. Sleep timer The sleep timer can turn the unit off after a set time. 1 2 Press [SETUP] to select “SLEEP”. Press [3, 4] to set the time (in minutes) and then press [OK]. “SLEEP 30” , . “OFF” (Cancel) (------------------J ≥ The remaining time is indicated on the unit’s display except when other operations are performed. The sleep timer is always the main timer on the unit. 13 RQT9941 SC-HTB880EB~RQT9941-B. book 14 ページ 2014年1月21日 火曜日 午後2時52分 Others Auto off function As a factory default, this unit will turn to standby mode automatically if there is no sound and it is not being used for approximately 20 minutes. To cancel this function Changing the unit and remote control code When other Panasonic equipment responds to the supplied remote control, change the remote control code. 1 2 Press [SETUP] repeatedly to select “AUTO OFF”. Press [3, 4] to select “OFF” and then press [OK]. 1 2 3 Press [USB/CD] to select “CD”. While pressing and holding [SELECTOR] on the unit, press and hold [USB/CD] on the remote control until the unit’s display shows “REMOTE 2”. Press and hold [OK] and [USB/CD] on the remote control for at least 4 seconds. ≥ To turn the function on, select “ON” in step 2. ≥ This setting cannot be selected when “DAB/DAB+” or “FM” is the source. ≥ When connected to a Bluetooth® device, the function does not work. ≥ To change the mode back to “REMOTE 1”, press [USB/CD] to select “CD” and then repeat the step 2 and 3 but replace [USB/CD] with [ ]. Bluetooth® standby When “SC-HC39” is selected from a paired Bluetooth® device’s Bluetooth® menu, this unit will turn on automatically from standby mode and establish a Bluetooth® connection. Software update Occasionally, Panasonic may release updated software for this unit that may add or improve the way a feature operates. [. . . ] Stand Installation accessories ∫ Supplied accessories ≥ 1 Safety holder ≥ 1 Screw ≥ 2 Wall mount brackets Fixing screw Soft blanket or cloth ∫ Additionally required accessories (commercially available) ≥ 4 Wall mount bracket fixing screws ≥ 1 Safety holder fixing screw ≥ 1 Fall prevention cord* ≥ 1 Screw eye * Use a cord that is capable of supporting over 33 kg (with a diameter of about 1. 5 mm). ≥ Keep the safety holder out of reach of children to prevent swallowing. ≥ Keep the wall mount brackets out of reach of children to prevent swallowing. 2 Fix the safety holder onto the unit with the screw (supplied). ≥ Screw tightening torque: 50 N0cm to 70 N0cm. Screw (supplied) 3 Attach the fall prevention cord (not supplied) to this unit. Cord (not supplied) Safety precautions Professional installation is required. The installation should never be done by any other than a qualified installation specialist. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC SC-HTB880EB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC SC-HTB880EB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.