User manual PANASONIC SDR-S150

[. . . ] Operating Instructions SD Video Camera Model No. SDR-S150 Before connecting, operating or adjusting this product, please read the instructions completely. For USA assistance, please call: 1-800-272-7033 or, contact us via the web at: http://www. panasonic. com/contactinfo PP VQT0X39 Before opening the CD-ROM package, please read the following. End User License Agreement You ("Licensee") are granted a license for the Software defined in this End User License Agreement ("Agreement") on condition that you agree to the terms and conditions of this Agreement. If Licensee does not agree to the terms and conditions of this Agreement, promptly return the Software to Matsushita Electric Industrial Co. , Ltd. ("Matsushita"), its distributors or dealers from which you made the purchase. Article 6 Indemnification The Software is provided "AS-IS" without warranty of any kind, either expressed or implied, including, but not limited to, warranties of non-infringement, merchantability and/or fitness for a particular purpose. Further, Matsushita does not warrant that the operation of the Software will be uninterrupted or error free. [. . . ] YES NO SETUP ENTER When the confirmation message appears, use the cursor button to select [YES], then press the button in the center. To stop deleting, select [NO]. Deleting still picture files recorded on an SD card by other equipment A still picture file (other than JPEG) that cannot be played back on this unit may be erased. Do not open the card slot cover while deleting. Scenes displayed as thumbnails in shades of blue and white cannot be deleted. If the write protection switch on an SD card is set to [LOCK], the scenes on the card cannot be deleted. (P16) When "CARD FULL. " is shown during recording, delete unnecessary scenes. If there are no scenes to be deleted, it means that the memory is full so insert a new SD card. In case of [ALL], the deletion may take time if there are many scenes on the SD card. When [ALL] is selected in the motion picture playback mode, the following scenes will be deleted. ­ When [PLAY MODE] is set to [VIEW ALL]: All the scenes on the SD card ­ When [PLAY MODE] is set to [BY DATE]: All the scenes selected by date Do not turn off this unit while deleting. When you delete scenes, use a battery with sufficient battery power or use the AC adaptor. If scenes conforming to DCF standard are deleted, all the data related to the scenes will be deleted. 66 VQT0X39 Locking scenes This is for preventing scenes from being deleted by mistake. Scenes recorded on an SD card can be locked so that they may not be deleted by mistake. (However even if you lock some scenes on an SD card, formatting the card will delete all the scenes. ) ¬ Rotate the mode dial to select or . 1 PLAY SETUP PLAY MODE LOCK DPOF SET YES NO Press the menu button, then use the cursor button to select [ PLAY SETUP]#[ LOCK]# [YES]. (P27) SETUP ENTER EXIT MENU 2 LOCK 1/24 Press the cursor button up, down, left or right to select the scene to be protected, then press the button in the center. [ ] indication appears and the selected scene is locked. 2 or more scenes can be set in succession. SETUP ENTER EXIT MENU To complete the settings Press the [MENU] button. Scenes displayed as thumbnails in shades of blue and white cannot be locked. (P105) If the write protection switch on an SD card is set to [LOCK], the scenes on the card cannot be locked. (P16) 67 VQT0X39 Formatting an SD card This is for initializing (formatting) cards. Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. (P76) ¬ Rotate the mode dial to select , , or . 1 SETUP DISPLAY DATE/TIME DATE FORMAT FORMAT CARD POWER SAVE SETUP ENTER YES NO EXIT MENU 1/2 Press the menu button, then use the cursor button to select [ SETUP]# [ FORMAT CARD]#[YES]. YES NO SETUP ENTER EXIT MENU When the confirmation message appears, use the cursor button to select [YES], then press the button in the center. To cancel formatting, select [NO]. Use this unit to format SD cards. If an SD card is formatted on other equipment (such as a PC), the time spent for recording may become longer and you may not be able to use the SD card. When you format the SD card, use a battery with sufficient battery power or the AC adaptor. Depending on the type of SD card being used, it may take time to format. If the write protection switch on an SD card is set to [LOCK], it cannot be formatted. (P16) 68 VQT0X39 DPOF setting This is for writing the printing data on an SD card. You can write the data of pictures to be printed, number of copies, and other information (DPOF data) onto the SD card. ¬ Rotate the mode dial to select . [. . . ] (Failure to do so will delay your repair. ) ·To further speed your repair, please provide an explanation of what is wrong with the unit and any symptom it is exhibiting. Mail this completed form and your Proof of Purchase along with your unit to: Panasonic Services Company 410B Airport Road Elgin, IL 60123-9333 Attn: Digital Camcorder Repair Dept. 118 VQT0X39 Index A MPEG2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 D F S Scene mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Manual adjustment mode (White balance) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 J L T V M W White balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]