User manual PANASONIC TX-32AS-500E

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC TX-32AS-500E. We hope that this PANASONIC TX-32AS-500E user guide will be useful to you.


PANASONIC TX-32AS-500E : Download the complete user guide (31736 Ko)

You may also download the following manuals related to this product:

   PANASONIC TX-32AS-500E (1602 ko)
   PANASONIC TX-32AS-500E (1589 ko)
   PANASONIC TX-32AS-500E (1589 ko)
   PANASONIC TX-32AS-500E (1614 ko)
   PANASONIC TX-32AS-500E (1587 ko)

Manual abstract: user guide PANASONIC TX-32AS-500E

Detailed instructions for use are in the User's Guide.

[. . . ] Please read these instructions carefully before operating this product and retain them for future reference. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. T0114-0 English ● For the information of the trademarks, refer to [eHELP] (Support > Licence). The illustration for TX-32AS500E / TX-32AS520E is used in this manual unless otherwise mentioned. [. . . ] ) If encrypted channels do not appear  Common Interface] in the Setup Menu [ ● There might be some CI modules in the market with older firmware versions that do not work fully interoperable with this new CI+ v1. — For more information, refer to [eHELP] (Functions > Common Interface), read the manual of the CI module, or check with the content provider. 10 English Identifying Controls Remote Control ● Displays channel list. 1 Standby On / Off switch 2 Off Timer ● Sets the time for the TV to automatically turn off. — Press after selecting channel positions to quickly change channel. — Adjusts the value of the selected item on the On-Screen Display Menu. 7 Ambient sensor ● Senses brightness to adjust picture quality when [Ambient Sensor] in the Picture Menu is set to [On]. Close Note the correct polarity (+ or -) Indicator / Control panel ● When pressing 4, 5, 6 buttons, the control panel guide appears on the right side of the screen for 3 seconds to highlight the pressed button. 1 27 3 4 5 6 Bottom side 1 Remote control signal receiver ● Do not place any objects between the TV remote control signal receiver and remote control. 2 Power indicator Red: Standby Green: On ● The LED blinks when the TV receives a command from the remote control. — To completely turn off the TV, please remove the mains lead from the wall socket. 12 English First time Auto Setup Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time. — These steps are not necessary if the setup has been completed by your local dealer. 8 - 10) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment. Tick the TV signal mode to tune, and then select [Start Auto Setup] : une (search for the available channels) t :  kip tuning s ● Auto Setup screen varies depending on the country and the signal mode you select. ● [DVB-C Network Settings] Normally set [Frequency] and [Network ID] to [Auto]. If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider with numeric buttons. 1 Plug the TV into mains socket and turn power on ● Takes a few seconds to be displayed. 3 Select the type of [Home Screen] The demonstration to explain how to use [my Home Screen] is displayed. Confirm the demonstration by following the on-screen instructions, and then select the desired [Home Screen]. Example: [Home Screen Selection] 2 Select the following items Set up each item by following the on-screen instructions. [. . . ] — Do not allow the cabinet and base to make contact with a rubber or PVC substance for a long time. Mains plug Wipe the mains plug with a dry cloth at regular intervals. 0)] DIGITAL AUDIO output PCM / Dolby Digital / DTS, Fibre optic Dimensions (W × H × D) 727 mm × 465 mm × 194 mm (With Base) 727 mm × 432 mm × 67 mm (TV only) Receiving systems / Band name Check the latest information on the available services at the following website. Note ● Design and Specifications are subject to change without notice. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC TX-32AS-500E




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC TX-32AS-500E will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.