User manual PANASONIC TX-L42EW6

[. . . ] Consult your local dealer for availability of DVB-T services in your area. Consult your cable service provider for availability of DVB-C services with this TV. This TV may not work correctly with the signal which does not meet the standards of DVB-T or DVB-C. Not all the features are available depending on the country, area, broadcaster and service provider. [. . . ] The automatic updating is performed under the following conditions : Standby (TV turned Off with the remote control) Recording of Timer Programming, Direct TV Recording or One Touch Recording is not in progress. To update immediately 1 Select [System Update Search Now] System Update Auto Update Search in Standby System Update Search Now Off Access 2 Searches for an update (for select access several minutes) and displays a corresponding message if any 3 Download Note Download may take for about 60 minutes. In this case, the schedule information (the date that the new version can be used) will appear. The update will not start when the TV is set to Off. 52 Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. 95 1 2 Select the external input AV Select [PC] Input Selection AV1 AV2 COMPONENT PC HDMI1 HDMI2 TV SD Card/USB select access Corresponding signals p. 103 If "H-freq. " or "V-freq. " is shown in red, the signals may not be supported. To return to TV TV PC menu setting (changed as desired) To make settings "How to Use Menu Functions" (p. 29) Menu White Balance Item R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Reset to Defaults Gamma Gamma Reset to Defaults Advanced Settings PC Setup V-pos Adjustments / Configurations (alternatives) Adjusts the white balance for red areas Adjusts the white balance for green areas Adjusts the white balance for blue areas Adjusts the white balance for red areas Adjusts the white balance for green areas Adjusts the white balance for blue areas Press the OK button to reset to the default White Balance Switches the gamma curve [1. 8] / [2. 0] / [2. 2] / [2. 4] / [2. 6] Please note the numerical values are reference for the adjustment. Press the OK button to reset to the default Gamma Switches to a wide view VGA (640 × 480 pixels), WVGA (852 × 480 pixels), XGA (1, 024 × 768 pixels), WXGA (1, 280 × 768 pixels, 1, 366 × 768 pixels) Options change depending on signals Set to the minimum level if noise occurs Other items For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2) by using HDMI cable (p. 101). Picture Setup Displaying PC Screen on TV Input Resolution Clock H-pos Adjusts horizontal position Adjusts vertical position Clock Phase Sync Reset to Defaults p. 30 - 37 Eliminates flicker and distortion Adjust after Clock adjustment Set to the minimum level if noise occurs Chooses another synchronous signal if the image is distorted [H & V] / [On Green] [H & V] : by the horizontal and vertical signals from your PC [On Green] : by the green signal from your PC (if available) Press the OK button to reset to the default PC Setup settings Note 53 USB HDD Recording You can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. The data broadcasting (MHEG, etc. ), radio broadcasting and the periods without any signal will not be recorded. Not all the programmes can be recorded depending on the broadcaster and service provider. Ensure the connection and setup are completed before start recording (p. 54, 55 ) Ensure not to connect or disconnect any USB devices during USB HDD recording. If the remaining capacity of the USB HDD is run out, the recording cannot be done. 1 2 Display the menu MENU Select [Setup] Main Menu Picture Sound Timer Setup select access 3 Select [Recording Setup] 1/2 Eco Navigation Recording Setup Link Settings Child Lock DVB-C Tuning Menu Language Display Settings Common Interface Network Setup Access select access USB HDD Recording To return to TV EXIT 4 Select [One Touch Recording] or [REW LIVE TV] Recording Setup USB HDD Setup One Touch Recording REW LIVE TV 180 minutes Off select One touch direct TV recording - What you see is What you record [One Touch Recording] Recording the current programme in the USB HDD immediately. Select the maximum recording time [30] / [60] / [90] / [120] / [180] (minutes) Recording Setup USB HDD Setup One Touch Recording REW LIVE TV 180 minutes Off LED will turn to orange (flash) while One Touch Recording is in progress. select LED access / store 56 To start One Touch Recording Set the position to "TV" DVD/VCR TV Start REC No other channel can be selected while the recording is in progress. To stop recording on the way DVD/VCR TV EXIT IDE GU or To playback or delete the recorded contents "Recorded TV mode" (p. 66) Even if One Touch Recording is in progress, you can playback all the contents. However, the recording may not work properly while playback. Record constantly [REW LIVE TV] Recording the current programme constantly. Select [Auto] to start REW LIVE TV Recording Setup USB HDD Setup One Touch Recording REW LIVE TV 180 minutes Auto select access / store When you select [Auto], the recording will start automatically. If the other recording is in progress, TV signal condition is bad or when any images are not displayed, this recording will not start. To operate the REW LIVE TV Set the position to "TV" DVD/VCR TV To pause To search backward (up to 90 minutes) (Press and hold) After pausing or searching backward, the following buttons are available to operate. search backward search backward / pause / forward playback playback / pause search forward stop (stops the current operation and goes back to live TV) (Press and hold) USB HDD Recording playback stop stops the current operation and goes back to live TV To stop the REW LIVE TV Recording Setup USB HDD Setup One Touch Recording REW LIVE TV Off Auto select [Off ] If you stop the REW LIVE TV, the recorded content for the REW LIVE TV will be deleted. REW LIVE TV will be stopped and the recorded content deleted automatically in the following conditions : (Even if REW LIVE TV stops for the following conditions, as long as the setting is [Auto], the new recording will start automatically in a condition that makes the recording available. ) selected other channels selected locked channel selected invalid channel no TV signal when the other recording starts when the TV is turned off or standby 57 Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory, and recorded contents on the formatted USB HDD. VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV screen by simply inserting into the SD Card slot. [. . . ] The panel might move slightly when it is pushed with a finger, and clattered sound might be heard. Remove the device and turn the TV Off with Mains power On / Off switch, then turn it On again. If the problem persists, contact your local Panasonic dealer or the authorized Service Centre. 101) Cannot connect to the network 105 Frequently Asked Questions Specifications Power Source Rated Power Consumption Standby Power Consumption Dimensions (W × H × D) Mass Aspect Ratio Visible screen size Number of pixels Speaker Audio Output Headphones Display panel Sound Connection Terminals TX-L24D35ES, TX-L42EW6 AC 220-240 V, 50 Hz 61 W 0. 30 W 12. 00 W (With monitor out recording) 588 mm × 382 mm × 172 mm (With Pedestal) 588 mm × 366 mm × 52 mm (TV only) 8. 0 kg Net (With Pedestal) 5. 5 kg Net (TV only) 16:9 61 cm (diagonal) 532 mm (W) × 299 mm (H) 2, 073, 600 (1, 920 (W) × 1, 080(H)) (115 mm × 30 mm) × 2, 8 : 10 W (5 W + 5 W) M3 (3. 5 mm) stereo mini Jack × 1 VGA, SVGA, WVGA, XGA SXGA, WXGA ······ (compressed) Horizontal scanning frequency 31 - 69 kHz Vertical scanning frequency 59 - 86 Hz PAL B, G, H, I, SECAM B, G, SECAM L, L' PAL D, K, SECAM D, K PAL 525/60 M. NTSC DVB-T DVB-C Aerial input Operating Conditions AV1 (SCART) AV2 input COMPONENT input VHF E2 - E12 VHF A - H (ITALY) CATV (S01 - S05) CATV S11 - S20 (U1 - U10) VHF R1 - R2 VHF R6 - R12 VHF H1 - H2 (ITALY) UHF E21 - E69 CATV S1 - S10 (M1 - M10) CATV S21 - S41 (Hyperband) VHF R3 - R5 UHF E21 - E69 PC signals Receiving Systems / Band name Check the latest information on the available services at the following website. [. . . ]