User manual PANASONIC WHADC0309G3E5UK

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC WHADC0309G3E5UK. We hope that this PANASONIC WHADC0309G3E5UK user guide will be useful to you.


PANASONIC WHADC0309G3E5UK : Download the complete user guide (654 Ko)

Manual abstract: user guide PANASONIC WHADC0309G3E5UK

Detailed instructions for use are in the User's Guide.

[. . . ] Indoor Unit WH-ADC0309G3E5UK Outdoor Unit WH-UD03EE5 WH-UD05EE5 WH-UD07FE5 WH-UD09FE5 Operating Instructions Air-to-Water Hydromodule + Tank Installation Instructions attached. Serial number and production year please refer to name plate. Manufactured by: Panasonic Appliances Air-Conditioning Malaysia Sdn. Lot 2, Persiaran Tengku Ampuan, Section 21, Shah Alam Industrial Site, 40300 Shah Alam, Selangor Darul Ehsan, Malaysia. F569829 English Thank you for purchasing Panasonic product. Before operating the system, read these operating instructions thoroughly and keep them for future reference. Table of contents Safety precautions ………………………………………… 3-5 To adjust initial settings …………………………………… 6-7 How to use ……………………………………………… 8-11 Cleaning instructions ……………………………………… 12 Troubleshooting ………………………………………… 13-14 Information ………………………………………………… 15 The illustrations in this manual are for explanation purposes only and may differ from the actual unit. [. . . ] Base Pan Heater NO To select whether or not to connect to the optional base pan heater. Base Pan Heater type Type A - The base pan heater activates only during deice A operation. Type B - The base pan heater activates when outdoor ambient temperature is 5 °C or lower. *1, *2 Cool Outdoor Temperature setting To set the outdoor ambient temperature for the AUTO mode to 15 °C change from HEAT to COOL. *1, *2 Heat Outdoor Temperature setting To set the outdoor ambient temperature for the AUTO mode to 10 °C change from COOL to HEAT. • The backup heater provides extra heat at low outdoor temperature. • Once the backup heater is set, it is automatically operated when conditions are fulfilled. • To disable the backup heater, press again. • Once the STATUS mode is entered, the display shows STATUS. • The STATUS mode cannot be activated when the display shows SETTING. • The total power consumption is an estimated value based on AC 230 V and may differ from value measured by precise equipment. ■ Note: ■ Note: 8 In normal operation, the , and buttons are not in use. Dealer User Dealer Operation/settings to be done only by the authorised dealer/specialist. Operation/settings to be done by the authorised dealer/specialist or user. Display Temperature setting System temperature setting The system controls the temperature for each menu based on the outdoor ambient temperature. • To set or change the temperatures, make sure to contact your nearest authorised dealer. 1 Press and hold for 5 seconds to enter the temperature range setting mode. (The display shows SETTING. ) 2 Press 3 Press 4 Press 5 Press or or to select a menu. to confirm the setting. • Repeat steps 2 to 5 to set other menus. User Checking the temperature range 1 Press and hold 2 Press • Press or to exit. to select a menu. Menu Setting of low outdoor ambient temperature. Setting of high outdoor ambient temperature. Display -5 °C 15 °C -15 °C ~ 15 °C -15 °C ~ 15 °C HEAT Setting of water outlet temperature at low outdoor 55 °C ambient temperature. Setting of water outlet temperature at high outdoor 35 °C ambient temperature. During HEAT mode, the water outlet temperature is adjusted as <Water outlet is shown the diagram on the right. Setting of outdoor ambient temperature to turn OFF heating operation during HEAT mode. Setting of sanitary water tank temperature. 25 °C ~ 55 °C max. [. . . ] Symptom Check Operation in HEAT/ *1 COOL mode is not working efficiently. Operation LED is not lit or nothing is displayed on the control panel. Force Heater Mode Button • If a malfunction occurs in the system, the backup heater may be used to heat up the water. • Refer to dealer for more details. *1 The system is locked to operate without COOL mode. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC WHADC0309G3E5UK




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC WHADC0309G3E5UK will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.