User manual PANASONIC WV-BP550

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC WV-BP550. We hope that this PANASONIC WV-BP550 user guide will be useful to you.


PANASONIC WV-BP550 : Download the complete user guide (393 Ko)

You may also download the following manuals related to this product:

   PANASONIC WV-BP550 (1379 ko)

Manual abstract: user guide PANASONIC WV-BP550

Detailed instructions for use are in the User's Guide.

[. . . ] CCTV Cameras WV-BPR550/WV-BPR554 ENGLISH (Lens : option) Before attempting to connect or operate this product, please read these instructions completely. FRANÇAIS ENGLISH VERSION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN For U. K. FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. WARNING THIS APPARATUS MUST BE EARTHED IMPORTANT The wires in this mains lead are coloured in accordance with the following code. Green-and-yellow: Earth Blue: Neutral Brown: Live As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol I or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black. [. . . ] Important Notice: After all the settings finished, move the cursor to RET on the menu and press to return to the SET UP menu. Completing this procedure makes these values remain valid until new values are stored, even if the power of the camera is off. · Editing the SPECIAL menu To edit the SPECIAL menu (change settings), proceed as for editing the CAM SET UP menu above. Move the cursor to RET, then press and simultaneously for 2 seconds or longer. Select the item to be changed and change the setting as described for the CAM SET UP menu. ** SPECIAL ** UP SIDE DOWN AP GAIN PEDESTAL OFF . . . . I. . . . + PUSH SW CAMERA RESET RET END -20- SETTING PROCEDURES q RS485 Setup You can remote control this camera by using a specified extension unit such as computer with a modem. The RS485 menu is used to set the parameters of the items for RS485 site communication below. The RS485 menu appears on the monitor screen. ** RS485 SET UP ** UNIT NUMBER 1 BAUD RATE 19200 DATA BIT 8 PARITY CHECK NONE STOP BIT 1 XON/XOFF NOT USE WAIT TIME OFF ALARM DATA POLLING DELAY TIME OFF RET BAUD RATE This item is used to select the transmission speed for the RS485 communication. DATA BIT This item is used to select the data bits for the RS485 communication. PARITY CHECK This item is used to select the parity for the RS485 communication. STOP BIT This item is used to select the stop bit for the RS485 communication. Select the stop bits and press . UNIT NUMBER This item is used to select the camera number that is used with RS485 communication. Select the camera number to be used with RS485 communication and press . -21- X ON/X OFF This item is used to select applying the flow control or not. Select NOT USE (not apply flow control) or USE (apply flow control) and press . WAIT TIME This item is used to select the wait time to re-transmit after confirming that no data is received from the controller. ALARM DATA This item is used to select the way of transmitting the alarm data. Select the alarm data transmission mode from following parameters: POLLING: Transmit the alarm data to the controller to request from the controller. AUTO 1: Transmit the alarm data each time the alarm signal is received. -22- DELAY TIME This item is used to select the time to transmit the acknowledge request when communicating on a twoline connection. Note: This item appears only when a two-line connection is used. · Installation of Software for RS485 Communication 1. When the window that says "Please insert the disk labeled: "Disk 2" into drive C:" appears on the monitor screen, insert the Install Disk 2 and press . When the installation is completed, the window that says "485_GUI Setup was completed successfully. " appears on the monitor screen. After installation of 485_GUI Setup is completed, open 485_GUI Setup, and set the RS485 communication parameters. q CAMERA Setup Move the cursor to CAMERA of the SET UP menu and press . [. . . ] Move the cursor to the ALARM parameter and select ON or OFF to set the alarm in the DISPLAY MODE. Note: When the system controller WV-RM70, WVCU550 or WV-CU550A is used with this model, select OFF for ALARM. To raise detection sensitivity, press to return to the MOTION DETECT menu. To obtain the optimum detection level, move the "I" cursor to adjust the level. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC WV-BP550




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC WV-BP550 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.