User manual PANASONIC WV-CL830

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC WV-CL830. We hope that this PANASONIC WV-CL830 user guide will be useful to you.


PANASONIC WV-CL830 : Download the complete user guide (294 Ko)

You may also download the following manuals related to this product:

   PANASONIC WV-CL830 (1548 ko)

Manual abstract: user guide PANASONIC WV-CL830

Detailed instructions for use are in the User's Guide.

[. . . ] Colour CCTV Cameras WV-CL830/WV-CL834 (Lens : option) Before attempting to connect or operate this product, please read these instructions completely. ENGLISH VERSION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN For U. K. FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. WARNING THIS APPARATUS MUST BE EARTHED IMPORTANT The wires in this mains lead are coloured in accordance with the following code. Green-and-yellow: Earth Blue: Neutral Brown: Live As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol I or coloured green or green-and-yellow. The wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black. [. . . ] Then move the cursor to the character area and select a new character. To erase all characters in the editing area Move the cursor to RESET and press . The display shown below appears and the CAMERA ID starts blinking. Blinking Notes: · The CAMERA ID stops at the edges of the monitor screen. · The CAMERA ID moves faster if any of / / / is kept pressed for a second or longer. Light Control Setting (ALC/ELC) You can select the mode for adjusting the lens iris. The modes are as follows: ALC: Select this mode when an auto iris lens (ALC lens) is used with this camera. ELC: Select this mode when a fixed iris lens or manual iris lens is used with this camera. ** CAM SET UP ** CAMERA ID OFF ALC/ELC ALC SHUTTER OFF AGC ON SENS UP OFF SYNC INT WHITE BAL ATW MOTION DET OFF LENS DRIVE DC END SET UP ENABLE WV-CL830 2. Under bright lighting conditions such as outdoors, use an ALC type lens because the ELC control range is not wide enough under these conditions. Use an ALC type lens if phenomena below occur: · Strong smear and/or blooming on highlight objects such as spotlight or sunlight from windows. · Noticeable flicker in the picture and/or colour rendition variations. Back Light Compensation (BACK LIGHT COMP) Back light compensation is available in for both the ALC and ELC mode. It eliminates by strong background lighting which makes the camera picture dark, such as a spotlight. You can select one of two modes (PRESET ON or PRESET OFF) of back light compensation. 2-1. ALC Mode with PRESET ON In normal use the important object in a scene is placed in the centre of the monitor's screen. In the factory setup mode, more photometric weight is given to the centre of the screen (where the important object is located) than to the edge of the picture (where a bright back light would most likely be located). In this mode, even though the backlight may vary, the object at the centre of the screen can be still be clearly seen. Note: If ELC is selected, set LEVEL according to this procedure. ** CAM SET UP ** CAMERA ID OFF ALC/ELC ALC SHUTTER OFF AGC ON SENS UP OFF SYNC INT WHITE BAL ATW MOTION DET OFF LENS DRIVE DC END SET UP ENABLE 1. ALC Mode with PRESET OFF ** ALC CONT ** BACK LIGHT COMP PRESET OFF MASK SET LEVEL RET END . . . I. . . . . + These modes are effective when the main object in the scene is not located in the center of the screen and a source of bright light is located near the centre of the screen. In these modes, the picture is divided into 48 corresponding areas mask the light to keep the clarity of the picture. Note: If ELC is selected, set MASK SET and LEVEL according to this procedure. The items MASK SET appears on the menu. ** ALC CONT ** BACK LIGHT COMP PRESET ON LEVEL RET END . . . I. . . . . [. . . ] To raise detection sensitivity, press to return to the MOTION DETECT menu. To obtain the optimum detection level, move the "I" cursor to adjust the level. Move the cursor to RET and press to return to the CAM SET UP menu. -34- Notes: · Masking or adjusting the detection level is needed to prevent malfunction under the following conditions: · When shooting an object under flickering fluorescent light or shooting in ELC. · When the object is lighted by lighting equipment that constantly turns on and off. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC WV-CL830




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC WV-CL830 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.