User manual PHILIPS 46PFL7007T

[. . . ] *Available on certain models only. EN 5 English Green To select the green option or the energy-efficient settings. Blue To select the blue option or to open the Widgets*. Read more about the remote control in Help > Use your TV > Remote control > Overview (Page 15). Press to select the next TV tour. The TV menus Yellow To select the yellow option. Let's learn more about these frequently used menus: the Home menu the Browse menu EN 6 In the Home menu , you can select the source to watch, such as a TV channel, or movies from a connected DVD player or USB flash drive. You can also add a new device or access the [Setup] menu for more settings. In the Options menu , you can select settings related to what is shown on screen. [. . . ] In the [Universal access] menu, press the yellow button to select [Mixed volume]. Press the Navigation buttons to move the slider up or down, then press OK. Audio feedback for the visually impaired This feature enables audio feedback when buttons are pressed on the remote control or TV. In the [Universal access] menu, press the blue button to select [Key beep]. Press the green button to turn on audio feedback or press the red button to turn it off. Press to exit. EN 29 English 4 Setup the TV Change picture and sound settings Settings assistant NonPu blish More picture settings NonPu blish Use the settings assistant to guide you through the picture and sound settings. Select [Setup] > [Quick picture and sound settings], then press OK. Follow the on-screen instructions to choose your preferred settings. 1. Select a setting to adjust: [Smart picture]: Accesses pre-defined smart picture settings. [Contrast]: Adjusts the intensity of bright areas, keeping dark areas unchanged. [Brightness]: Adjusts the intensity and details of dark areas. Select [Channel list], then press OK. EN 31 English Smart sound settings Reset to factory settings 3. In the entry screen that appears, press the Navigation buttons or Numeric buttons to edit the name, then press OK. Press to exit. Automatic update To set the TV to update digital TV channels automatically, leave the TV in standby mode. Once a day, the TV updates earlier found channels and stores new channels. Select [Setup] > [Channel settings] or [Satellite settings] > [Channel installation] > [Channel update message] > [Off], then press OK. To disable automatic updates In the [Channel installation] menu, select [Automatic channel update] > [Off]. Hide or unhide channels NonPu blish Hide channels Hide channels from the channel list, to prevent unauthorized access. Hidden channels appear in the channel list, but without channel information displayed. Repeat steps 5 and 6 to unhide other channels. Other options Select audio language If the TV channel has multiple or dual sound broadcast, you can select the preferred audio language. Select video stream (for DVBS channel only) If available, you can view different video stream of the channel. Select [Video selection] to view the various selection. Update channel list NonPu blish When the TV was switched on for the first time, a full installation of channels was performed. You can also manually start the channel update. Install channels Automatic install NonPu blish When the TV was switched on for the first time, a full installation of channels was performed. [. . . ] If you use an HDMI-to-DVI adapter or HDMI to DVI cable, check that an additional audio cable is connected to AUDIO L/R or AUDIO IN (mini-jack only). EN 57 English There is sound but no picture: Check that the picture settings are correctly set. Sound issues You cannot use EasyLink features: Check that your HDMI devices are HDMI-CEC compatible. EasyLink features only work with devices that are HDMI-CEC compatible. If a HDMI-CEC compliant audio device is connected to the TV and the TV does not display any mute or volume icon when the volume is muted, increased or decreased. This behavior is normal when a HDMI-CEC audio device is connected. USB connection issues USB device content is not displayed: Check that the USB storage device is set to `Mass Storage Class' compliant, as described in the storage device's documentation. [. . . ]