User manual PHILIPS CE139DR

[. . . ] Always there to help you Register your product and get support at www. philips. com/welcome Question?Contact Philips CE139DR User manual Contents 1 Safety 2 Your car audio system Introduction What's in the box Overview of the system 2 3 3 3 4 6 7 8 9 10 10 10 11 11 11 11 12 12 12 12 12 12 13 15 15 15 15 16 16 16 16 17 17 17 EN 1 7 Play from a storage device Control play Switch tracks 17 18 18 19 19 19 19 20 20 21 21 21 21 22 23 24 25 25 25 25 8 Play from an iPod/iPhone 3 Install the car audio system Connect wires Mount into the dashboard Attach the front panel Compatible iPod/iPhone models Connect your iPod/iPhone Control play Charge your iPod/iPhone 9 Listen to an external player 10 Adjust sound 11 Additional information Reset the system Replace the fuse Upgrade the firmware 4 Get started For the first time use Set the time format Set the clock Select a source Select a listening zone Mute the button beep 5 Listen to FM/MW radio stations Switch to FM/MW radio mode Select a tuner region Select a tuner sensitivity Search for a radio station Store radio stations in memory Play with RDS 12 Product information 13 Troubleshooting 14 Notice Care of the environment Trademark notice Copyright 6 Listen to DAB radio stations Switch to DAB mode Scan for on-air stations Program radio stations Display DAB information Set up for weak reception Use the DRC (Dynamic Range Control) Disable the DAB reception Reset the DAB tuner Remove invalid stations Check the current version of DAB firmware 1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation. [. . . ] • To disable the RDS function, rotate to select [RDS OFF]. Press and hold AS/SOURCE until [STORE---] is displayed. » After the search is complete, the first stored radio station is broadcast automatically. • To select a stored radio station, press , , , , , or . Select a program type Before tuning to RDS stations, you can select a program type to search for programs of the selected category only. 1 2 3 4 Store radio stations manually Press and hold menu. Press types. to access the system 1 2 3 repeatedly until [PTY] is to access the list of program Press BAND, , or select a tuner band. repeatedly to Tune to the radio station that you want to store. Press and hold , , , , , or to store the radio station at the selected channel. • To select a stored radio station, press , , , , , or . Rotate to select a program type, and then press to confirm. Program type Description Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M WEATHER FINANCE Play with RDS The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. If you tune to an RDS station, the station name is displayed. Enable the RDS function Note • The RDS function is enabled by default. • Only when the RDS function is enabled, RDS related settings can be accessed. 1 2 Press and hold menu. to access the system Press / repeatedly until [RDS ON] or [RDS OFF] is displayed. News services Politics and current affairs Special information programs Sports Education and advanced training Radio plays and literature Culture, religion and society Science Entertainment programs Pop music Rock music Light music Light classical music Classical music Special music programs Weather Finance EN 13 Item Program type Description Receive traffic announcement If you want to receive traffic announcement, enable the TA (Traffic Announcement) function. 18 19 20 21 22 23 24 25 26 27 28 29 30 31 CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT TEST ALARM Children’s programs Social Affairs Religion Phone In Travel Leisure Jazz Music Country Music National Music Oldies Music Folk Music Documentary Alarm Test Alarm 1 2 3 Press and hold menu. to access the system Press / repeatedly until [TA ON] or [TA OFF] is displayed. • [TA ON]: When a traffic announcement is on air, the system automatically switches to the tuner mode and begins to broadcast the traffic announcement. When the traffic announcement is over, the system returns to the previous mode. • [TA OFF]: Traffic announcement does not cut in. Tip Use alternate frequencies If the signal of an RDS station is poor, enable the AF (Alternate Frequency) function to search for another station that broadcasts the same program. • When a traffic announcement cuts in, you can press to switch the system to the previous mode. 1 2 3 Press and hold menu. to access the system Synchronize the system clock You can synchronize the system clock with an RDS station that transmits time signals. Press / repeatedly until [AF ON] or [AF OFF] is displayed. • [AF OFF]: Disable the AF function. 1 2 3 Press and hold menu. to access the system 1 2 3 Set the region for AF tuning You can set the region for AF tuning. to access the system Press / repeatedly until [CT ON] or [CT OFF] is displayed. • [CT ON]: Synchronize the system clock with the RDS station automatically. • [CT OFF]: The automatic clock synchronization with RDS station is disabled. Tip Press / repeatedly until [REGION ON] or [REGION OFF] is displayed. • [REGION ON]: Only RDS stations in current region can be tuned to automatically. • [REGION OFF]: All RDS stations can be tuned to automatically. EN • The accuracy of time depends on the RDS station that transmits time signals. 14 6 Listen to DAB radio stations Note • Make sure that the DAB radio receiver is securely • For optimal reception, securely connect a DAB radio • connected. Check with local retailer or go to www. WorldDAB. org for applicable DAB radio frequencies in your area. Tune to a detected station 1 2 3 4 Press to exit the system menu. / repeatedly or rotate until the name of the target station is displayed. Press Press to start listening. Program radio stations You can assign a sequence number to a detected station. Afterwards, you can quickly tune to it by pressing the corresponding numeric button on the main unit. Note • Before the programming, make sure that the scanning • You can store a maximum of six stations in each band. is complete. Switch to DAB mode 1 2 Press AS/SOURCE repeatedly to switch the source to [DAB/DAB+]. Press / repeatedly to select a band: DAB1, DAB2, or DAB3. Scan for on-air stations Program stations automatically Note • The operation does not replace the stations that are programmed in each band. 1 2 3 Press and hold to access the system menu. [. . . ] Follow the instructions to download the upgrade packet and complete the upgrade. • If the upgrade fails, reboot this system, and then perform the upgrade again. Upgrade the firmware Note • Power supply must not be interrupted during the • When the firmware upgrade succeeds, all settings are restored to the factory default status. upgrade. 6 Register your product 1 2 3 4 5 6 22 Go to www. philips. com/welcome. Click the link of "Register my product" (the exact wording of this link name may vary in different languages). [. . . ]