User manual PHILIPS HTL2151

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS HTL2151. We hope that this PHILIPS HTL2151 user guide will be useful to you.


PHILIPS HTL2151 : Download the complete user guide (1368 Ko)

You may also download the following manuals related to this product:

   PHILIPS HTL2151 (1383 ko)
   PHILIPS HTL2151 (2332 ko)

Manual abstract: user guide PHILIPS HTL2151

Detailed instructions for use are in the User's Guide.

[. . . ] You can find this information on the back or bottom of your product. •• •• Do not defeat the safety purpose of the polarized or grounding-type plug. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. •• Important safety instructions •• •• •• •• •• •• •• Read these instructions. [. . . ] that all devices are disconnected from the power outlet. a a (USB) Audio input from a USB storage device. b AUDIO-IN Audio input from an MP3 player (3. 5mm jack). Rear connectors Placement Place the subwoofer at least 1 meter (3 feet) away from your SoundBar, and ten centimeters away from the wall. For best results, place your subwoofer as shown below. d a b c e a AUDIO IN Connect to an analog audio output on the TV or an analog device. b DIGITAL IN-COAXIAL Connect to a coaxial audio output on the TV or a digital device. c DIGITAL IN-OPTICAL Connect to an optical audio output on the TV or a digital device. e AC MAINS~ Connect to the power supply. 6 EN Play audio from TV or other devices through your Soundbar. Use the best quality connection available on your TV and other devices. Good quality audio Option 1: Connect audio through a digital optical cable Best quality audio 1 TV Using a coaxial cable, connect the COAXIAL connector on your SoundBar to the COAXIAL/DIGITAL OUT connector on the TV or other device. • The digital coaxial connector might be labeled DIGITAL AUDIO OUT. 1 Using an optical cable, connect the OPTICAL connector on your SoundBar to the OPTICAL OUT connector on the TV or other device. Ideal for listening to music. EN 1 2 Connect a USB storage device to the SoundBar. »» The play starts after a few seconds. 8 Note •• This product may not be compatible with certain types •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. •• Do not remove the USB storage device while it is being read. of USB storage device. Note •• Koninklijke Philips Electronics N. V. bears no responsibility for improper wall mounting that results in accident, injury or damage. •• Before wall mounting, make sure the wall can support the weight of your SoundBar. Auto standby When playing media from a connected device, the SoundBar automatically switches to standby if: • no button is pressed for 15 minutes, and • no audio play from a connected device. Screw length/diameter Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter. 3 - 3. 5mm Apply factory settings You can reset your SoundBar to the default setting mode. > 25mm For information about how to wall mount your SoundBar, see the quick start guide. 1 In mute mode, quickly press AUX twice. »» The factory settings is restored. EN 9 English 5 Wall mount 6 Product specifications Note •• Specifications and design are subject to change without notice. Amplifier • FTC total output power: 34W • Left + Right : 16W (1%THD, 4ohm, 150Hz-20kHz) • Subwoofer: 15W (1%THD, 8ohm, 40Hz-150Hz) RMS total output power: 40W RMS (+/0. 5 dB, 10% THD) Frequency response: 20 Hz-20 kHz / ±3 dB Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted) Input sensitivity: • AUX: 2 V • AUDIO-IN: 1V • • • Audio • S/PDIF Digital audio input: • Coaxial: IEC 60958-3 • Optical: TOSLINK • Main unit •• •• •• • • •• •• Power supply: 110-240 V~, 50 Hz - 60 Hz Power consumption: 30 W Standby power consumption: ≤ 0. 5 W Speaker impedance: 8 ohm (Tweeter), 4 ohm (Woofer) Frequency response: 160 Hz-20 kHz Dimensions (WxHxD): 800 x 75. 6 x 52. 4 mm Weight: 3. 84 kg Subwoofer • • • • • • Impedance: 8 ohm Speaker drivers: 130 mm (5. 25") woofer Frequency response: 20 Hz-150 Hz Dimensions (WxHxD): 165 x 240 x 295 mm Weight: 2. 6 kg Cable length: 3 m Remote control batteries • 1 x AAA-R03-1. 5 V USB • • • • • Compatibility: Hi-Speed USB (2. 0) Class support: USB Mass Storage Class (MSC) File system: FAT16 and FAT32 Supports MP3 and WMA file formats Sampling frequency: • MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22 kHz, 24 kHz, 32 kHz, 44. 1 kHz, 48 kHz • WMA: 44. 1 kHz, 48 kHz Constant bit rate: • MP3: 8 kbps-320 kbps • WMA: 32 kbps-192 kbps Version: • WMA: V7, V8, V9 EN • • 10 Warning •• Risk of electric shock. Never remove the casing of the product. This section contains the legal and trademark notices. Notice of compliance This set complies with the FCC rules, Part 15. Operation is subject to the following two conditions: a This device may not cause harmful interference, and b This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] • A product used for commercial or institutional purposes (including but not limited to rental purposes). • Product lost in shipment and no signature verification receipt can be provided. VIRGIN ISLANDS… Contact Customer Care Center at: 1-866-310-0744 REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CONSUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS HTL2151




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS HTL2151 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.