User manual PHILIPS RI9753

[. . . ] To disconnect, turn any control to "off", then remove plug from wall outlet. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. To reduce the risk of fire or electric shock, do not disassemble the machine. 1 Check voltage to be sure that the voltage indicated on the nameplate corresponds with your voltage. [. . . ] The coffee brewing cycle can be interrupted at any moment by pushing the button. To brew 2 cups, the machine dispenses the first coffee and briefly interrupts dispensing in order to grind the second serving of coffee. Press the coffee button: once for 1 coffee twice for 2 coffees Appuyer sur le bouton central. Dispensing may be preceded by short sprays of hot water, and scalding is possible. The hot water/steam wand may reach high temperatures: do not touch it with bare hands. Wait for the container to be filled with the desired quantity of hot water. Dispensing may be preceded by short sprays of hot water, and scalding is possible. The hot water/steam spout may reach high temperatures: do not touch it with bare hands. After frothing the milk, brew coffee into the cup for a creamy cappuccino. In case of conflict, priority must be given to what is indicated in the operation and maintenance manual over the instructions provided on separately sold accessories and materials. Never drink the descaling solution or any products dispensed until the cycle has been carried out to the end. When descaling is performed, someone must be present during the entire process (approx. Descaling should be performed every 1-2 months or when the machine displays the relevant message. Use the Saeco descaling solution only, specially designed to comply with the technical specifications of the machine, to ensure the machine performance will not decrease over time, and to guarantee a safe and risk-free use. The descaling solution must be disposed of according to the manufacturer's instructions and/or applicable regulations in the country of use. Before starting a descaling cycle make sure that: 1 A large enough container is available; 2 The water filter (if supplied) has been removed. Pour the entire content of the Saeco concentrated descaling solution into the water tank, and then fill the tank with fresh drinking water up to the MAX level. Check that the Water function is active: The light of the button must be on. Repeat the operations from step 4 to step 9 every 3 minutes until all the descaling solution in the tank has been dispensed. Once the solution is finished, rinse and fill the tank with fresh drinking water. Check that the Water function is active: The light of the button must be on. Repeat the operations as described from step 11 to step 15 to perform a second rinse cycle. [. . . ] To correctly use the Intenza water filter, please consider the following instructions: 1. Store the water filter in a cool area in which the room temperature is between +1°C to +50°C (34°F to 122°F). Carefully read the operating instructions and the safety warnings provided with each filter. These instructions integrate the ones in the manual, as they take into consideration the specific application of the filter in the machine. [. . . ]