User manual PHILIPS SPB4230WA

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS SPB4230WA. We hope that this PHILIPS SPB4230WA user guide will be useful to you.


PHILIPS SPB4230WA : Download the complete user guide (923 Ko)

Manual abstract: user guide PHILIPS SPB4230WA

Detailed instructions for use are in the User's Guide.

[. . . ] Uninterruptible Power System (UPS) SPB4230WA Register your product and get support at www. philips. com/welcome EN User Guide 3 Table of contents 1 2 2. 1 2. 2 2. 2 3 3. 1 3. 2 3. 3 3. 4 4 5. Important Your UPS What's in the box What you'll also need UPS overview Getting started Connect your UPS Connect your UPS to a phone/fax/modem Connect your UPS to a TV/VCR/DVDR/cable box Check the power requirement of your equipment Using your UPS Using more of your UPS Storage Warranty and service Technical data Frequently asked questions 4 4 5 5 6 7 7 8 8 9 9 11 12 13 16 17 3 1 Important Take time to read this manual before you use your UPS. It contains important information and notes regarding operating and maintaining your UPS and batteries. © 2007 Koninklijke Philips Electronics N. V. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. [. . . ] If it detects an overload, an audible alarm will sound. You will hear a long beep before the system automatically shuts down. If this occurs: 1 Unplug at least one piece of equipment from the battery back-up outlets. Note Your UPS is equipped with a self protection feature that prevents accidental damage if the UPS is turned on and off repeatedly. Once you turn your UPS off, you must wait 5 seconds before turning it on again. Philips recommends you perform a simulation test when using your UPS for the first time or when connecting an additional piece of equipment. Restore power to UPS by plug the power cord back into the wall outlet. Repeat this simulation test a few times to confirm your UPS is working properly and determine the expected runtime. Note If a power failure occurs immediately after you turn on the UPS, but before its initial self-test sequence, your UPS will automatically shut down. This allows your UPS to check the quality of the power that is delivered to your connected equipment. Tip To maintain a full battery charge, leave your UPS plugged in and turned on at all times. Even under normal circumstances, and in the absence of defects, this surge protection will end when the components providing protection exceed capacity and cease to provide protection from power surges and spikes. These surge protection components feature an internal protection that will disconnect them at the end of their useful life, but will still maintain power to your connected equipment (load). When this occurs, you will have to replace your UPS to restore protection to your connected equipment. 2 Wait for the power indicator to 3 Unplug the UPS power cord from the wall. When an electrical power failure occurs, the battery power outlets of your UPS will supply power to the connected equipment from its battery. Confirm all equipment connected to the battery power outlets of your UPS is operating under the limited rating power. 10 illuminate. Your UPS is equipped with an LED indicator display to keep you alert to its effectiveness. This surge protection indicator light is illuminated when the surge protection components are functioning properly. If this light is off, it indicates that the surge protection components have reached capacity and are no longer able to protect your connected equipment against surges. Your UPS also offers a "ground" indicator light to confirm that the wall outlet is wired properly. safe to channel to your equipment. Once the power returns, the UPS will automatically reset itself to normal operation and recharge its internal battery. Back-up alarm In the event of a power failure, your UPS will sound an alarm, alerting you that it is going into back-up mode. To mute the alarm: 1. Press the power button for one second and release. [. . . ] improper use of the product, such as for an aquarium or other situation involving exposure to moisture. war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence or abuse. Warranty Claim Procedure Claims under this warranty must be made within 15 days from the date of the Occurrence and must be accompanied by proof that the claimant is the original purchaser of the surge protector, including a receipt for the purchase of the surge product. To file a claim under this Connected Equipment Warranty, you must do the following: Call Philips's Customer Support at (919) 573-7863 within 15 days of the Occurrence. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SPB4230WA




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SPB4230WA will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.