Detailed instructions for use are in the User's Guide.
[. . . ] Philips Digital PhotoFrame
Copyright
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of the company. Disclaimer
The company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, the company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. Safety Instructions
Before operating the PhotoFrame, carefully read and follow the instructions below. [. . . ] Connect the other end of the USB cable to a USB port on the computer, making sure the connectors are fully inserted. Once connected, the PhotoFrame will enter PC transfer mode automatically. When the computer has detected the PhotoFrame, the PhotoFrame will appear in âMy Computerâ as âremovable diskâ. Now you can freely transfer the files on the PhotoFrame as you would on other disk drive. Getting started EN-13
Philips Digital PhotoFrame
⢠You can copy photos from the computer to the PhotoFrame, and vice versa. Select Memory Card, and then press âOKâ, The screen shows the photos contained on your memory card
Managing photos
EN-17
Philips Digital PhotoFrame
4. If there is more than one page, you can press or to go to the previous or next page to browse photos. Press or to move to the photo you wish to select, and then press âOKâ to confirm the selection. The selected photo will have a selection mark Repeat Step 6 to select more photos as desired. If you wish to select all the photos shown on the current page, select "Select All" in the pop-up menu and press âOKâ. From the pop-up menu, press then press âOKâ or to select Tag It, and
EN-18
Managing photos
Philips Digital PhotoFrame 9. Select a default target album to copy and sort the photos into this specified album. In the main menu, press or to select PHOTO ALBUMS, and then press âOKâ. the screen shows: ⢠The file source , including USB , Memory Card and Internal Memory. ¢ The default albums on the internal memory, including TIMELINE, Pre-install, Uncategorized, Family, Friend and Vacation. ¢ The âUSBâ and âMemory Cardâ file sources will only appear when a USB
flash drive and a memory card have been inserted to the PhotoFrame. ¢ For details about the âTIMELINEâ album, see "Managing photos by using the TIMELINE album" on page 22. Press or to select the source of your photos, such as the Internal Memory album, and then press âOKâ. )
Managing photos
EN-19
Philips Digital PhotoFrame
The screen shows all the photos that are available on the internal memory. If there are more than one page, you can press or to go to the previous or next page to browse photos (If not, skip this step. Press or to move to the photo you wish to select, and then press âOKâ to confirm the selection. Press âMENUâ If you wish to select all the photos shown on the current page, select âSelect Allâ in the pop-up menu and press "OK". [. . . ] Smart Copy⢠can be used to resize selected images to decrease loading time. The PhotoFrame will display in a landscape mode if placed on its long side (as shown on your product box). You can connect the PhotoFrame directly to your computer via a mini USB cable. The Digital PhotoFrame (DPF) will write information into the MetaData of tagged photos. [. . . ]