User manual PINNACLE PCTV 200E

[. . . ] PCTV 200e Hardware PCTV 200e Hardware User's Guide GB April 2005 © Pinnacle Systems GmbH 2005 All rights reserved. No part of this manual may be reproduced or transferred to other media without explicit written permission from Pinnacle Systems GmbH, Braunschweig, Germany. All brand or product names are trademarks or registered trademarks of their respective holders. This manual is printed on chlorine-free, bleached paper using solvent-free ink. [. . . ] You also get access to the free information services, videotext and the electronic program guide (EPG), which let you program the shows you want to record simply and easily. Additional services planned for the future include digital radio, interactive television, and IP data reception. Some of these services are already available in selected areas. And now have fun with your PCTV 200e! More information about DVB-T can be found on the Internet at www. dvb. org. 1 Box Contents PCTV 200e Active planar antenna Antenna adapter Retaining clip Remote control with batteries (Figure is an example) USB cable and 2 ferrite clips with special key Adhesive pads Quick Start instructions Installation CD On CD-ROM: User manual, Hardware instructions Remote control instructions Depending on the version of your product, package contents may vary. 2 System Requirements In order for the PCTV 200e to function smoothly, your system must meet the following requirements: Computer Hardware Processor Minimum: Pentium III 1. 0 GHz or equivalent AMD Athlon XP processor (SD only) Recommended: Pentium IV 2. 0 GHz, Pentium M 1. 3 GHz or equivalent AMD Athlon 64 processor (SD and HD) Working memory Minimum: 256 MB RAM Recommended: 512 MB RAM Hard disk Minimum: IDE hard disk with master mode drivers and 5 GB free disk space Recommended: U-DMA hard disk with 20 GB free disk space Graphics controller Minimum: DirectX 8 compatible graphics card Recommended: DirectX 9 (or higher) compatible graphics controller Sound controller Minimum: DirectX 9 compatible sound controller USB port USB (full-speed or high-speed) port CD-ROM / DVD-ROM drive or recorder Minimum: CD-ROM or DVD-ROM drive Recommended: CD or DVD recorder Computer Software Windows XP (Home Edition, Professional Edition or Media Center Edition 2005) with the latest Service Pack 3 Connecting the Antenna You can use different types of antennas with the PCTV 200e: Active Planar Antenna To mount the active planar antenna (optional), insert it into the antenna input socket on the side of the PCTV 200e. In order to insert the antenna into the PCTV 200e casing, the marking stamped on the side of the antenna must be lined up with the seam of the PCTV 200e casing. When using the active planar antenna (optional) or another active antenna without its own power supply, make sure that the antenna power supply is activated in the "Settings" menu in the Pinnacle MediaCenter application. If the antenna power supply is active, a red LED on the PCTV 200e casing will light up. 4 Or: Other Antennas If your PCTV 200e does not include an antenna or you live in an area that is not suited for receiving signals with indoor antennas, connect the PCTV 200e to another antenna (e. g. , your building antenna) using the antenna adapter: Insert the antenna adapter into the antenna input socket of the PCTV 200e from the side. When doing this, make sure that the plastic knob on the PCTV 200e casing fits into the round groove of the adapter. Now turn the adapter until it snaps into the PCTV 200e casing and both line up properly. Finally, connect the antenna adapter to your building antenna or to an indoor antenna. To connect an antenna, you need the corresponding cable. Note that the quality of the cable has a great influence on the quality of the reception. 5 Connecting to the Computer Connect your PCTV 200e with your computer via the USB port. Use only the USB cable included in the box. In order to minimize possible interference when reception conditions are less than optimal, we recommend attaching the ferrites included in the package (see Figure 1) to both ends of the USB cable. To do this, lay one end of the USB cable into a ferrite clip and fold the sides of the clip together (Figure 2). Repeat the procedure for the other end of the USB cable and the second ferrite. If at some time in the future, you no longer want to use the ferrites, use the special key included in the package to open them (Figure 3). 6 Positioning your PCTV 200e If you are using the active planar antenna (optional), fold it up when you move it or take it anywhere. Whenever the PCTV 200e is running, always unfold the antenna and make sure that it is positioned upright. You can place your PCTV 200e in various positions: Sitting on a Flat Surface You can place your PCTV 200e on a flat surface. If you are using the active planar antenna, make sure that it is unfolded into a right angle and is sitting upright. or Attached to a Laptop Computer You can also attach your PCTV 200e directly to your laptop. [. . . ] After this, you can edit the saved video files with Studio QuickStart. 11 Konformitätserklärung nach ISO/IEC Guide 22 Declaration of conformity in accordance with ISO/IEC Guide 22 Nr. / No 1. 00 Anbieter / Supplier : Anschrift / Address : Produkt / Product : Pinnacle Systems GmbH Frankfurter Strasse 3c 38122 Braunschweig, Germany PCTV 200e Das oben beschriebene Produkt ist konform mit: The product described above is in conformity with: Dokument-Nr. [. . . ]