User manual POLAROID DHM-0100

[. . . ] Progressive Scan DVD Player DHM-0100 Operation Manual 20050228 WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The ventillation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the apparatus. CAUTION TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH ANY EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE PLUG CAN BE FULLY INSERTED WITHOUT EXPOSING ANY PARTS OF THE BLADES. RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] · Item selection in the SETUP menu is done by using the Direction buttons and the ENTER button. Note: To setup the TV display mode, the player must be stopped. 11 Setup Menu Items : Press the SETUP button on the remote control. The following menu will be shown: -- GENERAL SETUP PAGE -TV Display Angle Mark OSD Lang Captions Screen Saver LB On ENG Off On 1. GENERAL SETUP Go To General Setup Page TV DISPLAY · Normal/PS -- GENERAL SETUP PAGE -This is selected when the DVD player is connected TV Display NORMAL/PS to a normal TV. Wide-screen images are shown Angle Mark NORMAL/LB on the screen, but with some parts cut OSD Lang WIDE automatically. Captions · Normal/LB Screen Saver This is selected when the player is connected to a normal TV. Wide screen images are shown on the Set TV Display Mode screen, with black bands on the top and bottom. · WIDE This is selected when the player is connected to a wide-screen TV. - ON - OFF -- GENERAL SET UP PAGE -TV Display Angle Mark OSD Lang Captions Screen Saver Set Angle Mark ON OFF OSD LANGUAGE This used to select the OSD language. - English - Spanish - German - French -- GENERAL SETUP PAGE -TV Display Angle Mark OSD Lang Captions Screen Saver Set OSD Language English French German Spanish CAPTIONS This option can show or hide the captions. - On (Show captions) - Off (Hide captions) -- GENERAL SETUP PAGE -TV Display Angle Mark OSD Lang CAPTIONS Screen Saver Closed Caption ON OFF 12 SCREEN SAVER Start the screen saver, the screen saver image appears when the player stops or the image is frozen for a few minutes. - ON (Start the screen saver) - OFF (Remove the screen saver) -- GENERAL SETUP PAGE -TV Display Angle Mark OSD Lang Captions Screen Saver SCREEN SAVER ON OFF 2. SPEAKER SETUP When SPEAKER SETUP option is selected, the following menu will be shown. DOWNMIX · LT/RT Discs recorded multi channel soundtrack, the output signal will be incorporated to left and right channel. · STEREO A disc recorded with multi-channel soundtrack will be changed to stereo. DOLBY DIGITAL SETUP · DYNAMIC This option is used to set the compression ratio in order to control the sound (volume) contrast. -- SPEAKER SETUP PAGE -Downmix Dynamic Set Downmix Mode LT/RT Stereo -- SPEAKER SETUP PAGE -Downmix Dynamic FULL 3/4 1/2 1/4 0FF Set DRC to 1/2 Conpression 3. VIDEO SETUP When VIDEO SETUP option is selected, the following menu will be shown. · VIDEO OUT : CVBS/S-VIDEO YUV · VIDEO TV : P-SCAN INTERLACE Note : To select P-SCAN mode, the P-SCAN output must be connect to P-SCAN TV, otherwise the picture will be unstable. -- VIDEO SETUP PAGE -Video Out TV Mode CVBS/S-VIDEO YUV -- VIDEO SETUP PAGE -Video Out TV Mode P-SCAN Interlace 13 4. PREFERENCE SETUP AUDIO If a language listed below is recorded on the disc, you can play the sound in that language. - English - French - Spanish - German SUBTITLE If a language listed below is recorded on the disc, you may set the subtitle to be displayed in that language. - English - French - Spanish - German - Off DISC MENU If a language listed below is recorded on the disc, you can set the Menu to be displayed in such language. - English - French - Spanish - German DEFAULT User can load the original factory settings by choosing RESET and pressing ENTER. [. . . ] Insert a picture CD into the tray and the disc will be loaded automatically. If the disc type can be identified, the player will start showing the pictures one by one (Side Show Mode). Operations: During Slide Show Mode: · Pressing the PAUSE button will freeze the screen, so that the current picture can be held for a long time. · Pressing the NEXT button on the remote control will skip the next picture. [. . . ]