User manual POLAROID DRM-2001G

[. . . ] DVD Recorder with 80GB Hard Drive DRM-2001G User's Manual 20060425 Safety Instructions Danger symbol: The lightening flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage in the unit. Warning symbol: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions. WARNING: To prevent fire or electric shock, do not expose the unit to rain or moisture. Never attempt to open the cabinet; dangerous high voltages are presented in the unit. MAINTENANCE NOTICE: · Do not put the unit: near strong magnetic fields, somewhere exposed direct sunlight or near heat radiation equipment (such as a heater), on top of other heat radiation objects, in a place with bad ventilation and dirt, somewhere subject to vibration and instability, or somewhere exposed to moisture or rain. [. . . ] If the input is invalid, the system will prompt an input error message. At the same time, the "Date Input Editor Box" will be left empty. Please enter the date again. 24 Timer Recording Setting up the starting time of recording: In the "Item Editor" dialog box, use the arrow buttons and the "OK" button to highlight the "Start" option. Enter a value between 0:00 and 23:59 with the number buttons and press the "OK" button to confirm. If the input value is beyond the range of 0:00-23:59, the system will give an invalid message. Setting up the end time of recording: Setting up the end recording time is similar to setting the starting time, as described in the above section. In the "Item Editor" dialog box, use the arrow buttons and the "OK" button to highlight the "End" option. Enter a value between 0:00 and 23:59 with the number buttons and press the "OK" button to confirm. This setting means when the end time is reached, the recording process will be stopped and the unit turns to standby status. Record To source: You may choose to record directly to a disc or the hard disc drive. Setting up the record title: Use or arrows to change the letter and press the "OK" button to enter it. To delete a set timer recording: Select any timer recording item and press the "ADD/CLEAR" button to delete it. Notes: · After setting up the timer recording schedule, configure the system according to the schedule and make sure the system is in standby or working status. · If the system is conducting another operation 5 minutes before the scheduled recording time, an information box will pop up prompting you whether to start recording or not. If you still want to record, highlight press the "OK" button to confirm. If the information box is left unattended, the system will automatically record. · If the system is in standby status, it will enter the recording mode automatically 3 minutes in advance and start recording following the set schedule. · After completing the recording, the system will restore the status before the recording automatically. · The system must be properly configured with the set values before completing expected recording(s). · Select any timer recording item and press the "ADD/CLEAR" button to delete it. · Do not use a finalized DVD+/-R disc. 25 Play Mode Menu Description In the Play Mode, the system control is done through the menu operations or function keys. Press the "DISPLAY" button to show or hide the control bar menu. [. . . ] Indexing a picture: · In the Program Mode control bar menu, use the or button to move the cursor and select the "Index Picture" item. · If you find a favorite picture during playing, press the "OK" button and the picture will become the index picture of the title. To exit the chapter editing: · Press the "EDIT" button to exit this mode. Please be patient as this does take some time. 44 Troubleshooting Guide Before contacting service personnel, please check possible problems and solutions below: SYMPTOM No power 1. POSSIBLE CAUSE Power supply disconnected Bad connection between power plug and receptacle Power of receptacle switched off Incorrect input connection Disc is deformed or dirty System is in mute status Incorrect signal connection Incorrect TV status TV system out mode is Progressive, but your TV system is Interlace mode Wrong TV system selection Improper color adjustment Incorrect video output 1. [. . . ]